Read more Read less
MODEL NO. EM 335
VIA 12V BATTERY < 3minutes
VIA 12V CIG. PORT < 10minutes
VIA 5V/2V USB < 10minutes
1 The device is designed for vehicle emergency start while running out voltage of car battery.
2 OPERATING INFORMATIONS:
3 Cannot start vehicle because of low voltage of car battery, Connects the device to 12V car battery by alligator clamps, red clamp to positive and black clamp to negative. It will transfer all the rest electric power to the device capacities form car battery and indicates CHARGING on device screen. By pressing START to start vehicle while it indicates FULL CHARGE on device within 3-5 minutes. If it does not indicates FULL CHARGE after 3-5 minutes, means the car battery is running out of voltage. In this case, Please charge the device via power bank, DC adapter or other car battery, after it indicates FULL CHARGE on device screen within 3-5 minutes. Then press START button to start vehicle.
4 If the device still can not get it charged for start vehicle from above mentioned operations. Please use backup ways to recharge the device such as car battery, power bank, laptop etc.
CONTROL PANEL INSTRUCTIONS:
1 POWER ON/OFF:
2 Device full charged, Press START delays 10S (Red button)
button to TURN ON and hold START delays 10S (Red button) button to TRURN OFF.
3 Device will TURN ON automatically under charging, unavailable to TURN OFF.
4 Device will TURN OFF automatically after 30 minutes without operations and power supply.
MODERN VEHICLES CONTAIN EXTENSIVE ELECTRONIC SYSTEMS, IT IS STRONGLY RECOMMENDED TO CHECK WITH VEHICLE MANUFACTURER FOR ANY SPECIFIC INSTRUCTIONS MANUFACTURER FOR ANY SPECIFIC INSTRUCTIONS REGARDING THE USE OF SUPERCAPACITOR STARTER.
WHEN CHARGING BY EXTERNALA POWER SOURCE, DO NOT CHARGE THE APPLIANCE WITH 12V AND 5 VAT THE SAME TIME, IT WILL DAMAGE THE APPLIANCE AND THE EXTERAL POWER SOURCES.
ACCESSORY (STAMDARD & OPTIONAL)：
5V USB CABLE 1 PIECE
12V CIG. CABLE 1 PIECE