auto start genset control LXC3110 control panel for generator
The DSE3110 can be utilised as a Manual or Auto Start Module for single gen-set applications or engine only applications. The module has been designed to work with electronic and non-electronic engines, providing advanced engine monitoring and protection features.
The DSE3110 includes a back-lit icon LCD display which clearly shows the status of the engine at all times.
The module has been designed to combine a maximum of 16 generators and 16mains (utility)
supplies up to a maximum of 20 in one system, e.g. 16 generators and 4mains (utility) supplies (DSE5560 required to synchronise with the mains).
Continuous Voltage Rating 8 to 35 V Continuous.
Cranking Dropouts Able to survive 0 V for 50mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achineved without the need for internal batteries.
Charge Fail/ Excitation 8 to 35 V fixed power source 2.5W
Nominal Standby Current 23 mA at 12 V, 18 mA at 24 V
MAXIMUM OPERATING CURRENT 35 mA at 12 V, 30 mA at 24 V
OUTPUT A (FUEL) 2 A DC at supply voltage
OUTPUT B (START) 2 A DC at supply voltage
AUXILIARY OUTPUTS C & D 2 A DC at supply voltage
VOLTAGE RANGE 15 V - 333 V AC (L-N)
FREQUENCY RANGE 3.5 Hz to 75 Hz
VOLTAGE RANGE 0.5v to 70v
FREQUENCY RANGE 10,000 Hz (max)
OVERALL 9.8 cm x 7.9 cm x 4.0 cm
PANEL CUT-OUT 8 cm x 6.8 cm
MAXIMUM PANEL THICKNESS 8 cm