Multifunction small hand bending machine folding machine folding machine
The newly opened restaurant, buy a manual bending machine to send a small tool (caulking gun or a paint shaker or hac ksaw frame), gadget requires photographed before they take, oh, when I change the price, products exported to Europe, reliable, absolutely ex-factory price Oh, come buy Oh, welcome to buy used, large concessions.
Bending principle : first, the use of a knife pressed iron plate, then lift up under the knife bending, bending machine the entire surface using spray processing, so the knife also has a layer of spray layer. In the bending process, the blade red spray layer may come off point, does not affect the use, ease of use.
1. The manual bending machine happens to be the best optimum height for urging the height of human design, the handle.
2. The bending machine can also be crushed edge, that is, overlaps, to achieve the so-called 0-degree angle.
3. The bending of the bending machine tool clamping, when bent, plate bending machines and do not do sports, fold out the angle is very beautiful, very little small arc length of the flange can also be very small.
4. The bending machine with upper and lower blade clamp, lift up on folding plate flange, in the process of bending the workpiece and the tool makes relative motion and shock, so you can ensure the integrity and smooth surface to prevent abrasion of the workpiece surface, so the stainless steel plate and color plate bending or beneficial
Features (below each function has picture presentation)
1. The sheet folded angle of 40 degrees to 180 degrees, can be repeated bending - General Bend
2. The sheet that is folded edge crushed to 0 degrees - to prevent scratching hand edge of burr (Accessibility
Suitable for thin sheet)
3. Place the sheet off a small U-shaped - for the needs of small signs, such as bending the U-shaped things (Accessibility
Suitable for thin sheet)
4. Fold small side - conventional bending - mainly used for small parts
5, 4 fold bottom edge of a small box (a minimum of cuffs in 20mm or less)
Note: Accessibility to use with features found in the process, mainly used for bending
Bending angle: 0-180 degrees
Bending width: 920mm
Bending Machine Size: 1100 * 620 * 950mm (corresponding to the length, width, height)
Wooden packaging size: 1200 * 450 * 210mm
Packaging: wooden packaging
Bending thickness : When full thickness 1.2mm, the thickness can be increased when not fully loaded, such as when turning left and right plate thickness up to 60mm 3mm, at around 100mm thickness of up to 2.5mm, 200mm 2.0mm, about 700mm 1.5mm.
Fold thick plate (greater than 2mm) Tips : bending machine the edge of a screw to adjust the pitch of the blade is closed, can be appropriately adjusted spacing of the blade, the better off plate, then loosen the back of the knife plate screw slightly moved back to the point blades, a gap thickness of the sheet, so that bending of the blades there is no pressure, and the machine is better. Fold in the side when folded narrow panels. Each of the bending machine body design is very useful, very sophisticated design, can all be used to adjust, and when their own research slowly bend Oh! During use, a problem can contact me.
Key parts of the presentation : bar following screw can adjust the blade gap when closed, a gap is found, you can go down the screw, when you need some time off planks to the gap may increase when you use; bending machine intermediate top small triangle at the nut there may be tightened down, the purpose is to protect the middle of the plate, the bending process under the knife blades will give a force plate, 2 side blades have fixed it all right, in the middle of words designed to tighten the screws, giving it a downward force to counteract the upward force, while not giving it up rebound in the space; when the blade is not found in a line, you can loosen the screws on the back of the blade, and then adjusted to a line , and then tighten the screws.
Bending range : iron, galvanized sheet, steel mesh, aluminum, stainless steel plate, etc.
Blade are used in thick plate, with ribs fixed blade treated so easily creased sheet.
Call or whatsapp
Call more other machine
call or email