This rod is made by Brian Crower . It is also made specifically for 7AGE
builds. Unlike the 7AFE rod it will have a floating wrist pin identical to the
4AGE. This means you will be able to run 4AGE pistons or order aftermarket
pistons with floating wrist pins.
This does mean that these rods will not work with stock unmodified 7AFE
They are .5mm longer than the 7AFE rods to bring them flush with the deck just
like 4AGE rods.
These rods will be equivelent to the Brian Crower Sportsman rods for the 4AGE.
They will come with ARP 2000 hardware.
The standard ARP 2000 rods are good for 8500 RPM and 600 HP.
The 625+ shoudl be able to take anything you can do with the stock crank and
Center to center length is 133mm
Big end bore 51mm
Small end bore 20mm (Floating wristpin)
21.8mm width on big end and small end