Morcote High Build Epoxy Coating is a two-component surface tolerant anti-corrosion epoxy coating for steel and concrete surfaces. It is a self-priming coating for old and painted steel surfaces. It is highly recommended as a maintenance coating on rusty or painted surface where abrasive blasting is not possible. ECOCOTE 160HB can be top-coated with alkyd, acrylic, polyurethane, vinyl and other top-coats.
New construction as well as maintenance painting of rusty steel or upgrading old coatings. Ideal for steel buildings, piping, machinery, equipment, bridges, tank and exposed structural steel. Excellent for waste water tank lining and corrosion protection for re-bars in structure repair works. One or two coats is required for most applications. Hand or power tool cleaning is acceptable for rusty surface.
Easy application - Applied by roller or spray.
Chemical resistant - resistant to wide range of industrial chemicals.
High build - can build up to 300 microns DFT in one coat.
Anti-corrosion - excellent protection properties for steel surfaces.
Surface tolerant - adhere well to surface with minimum surface preparation and old
Good adhesion - Adhere very well to almost any surface.
Packaging: 5kg set