Coaxial pressed steel chassis, six and a half inch speaker with simple six decibel passive filter for the tweeter. The midwoofer has exactly the same specifications on paper as that used with the component versions of this speaker yet of course bears a pole rising up through the middle in order to house the tweeter which is fixed-position. A single quite large capacitor sits alongside this tweeter by way of highpass filter. There are cables and fixings supplied and you also get simple metal mesh grilles with a smart DLS badge upon them, and a separate paper printed template to use to cut your mounting holes. (I found a small printing error deep in the supplied spec and installation sheet for the whole range that said the mounting depth was 28mm rather than the actual 58mm.)
- Woofer size: 16.5cm (6.5in)
- Tweeter: 16mm (0.63in) EFR Dual Cone
- Power handling capacity: 50w RMS/80w max
- Frequency range: 50Hz to 20kHz
- Crossover: simple 6dB cap
- Sensitivity: 92dB (1W/1m)
- Magnet size: 80mm (3.15in)
- Mounting depth: 58mm (2.28in)
- Mounting hole:145mm
- Impedance:4 Ohms
location : Penang / Butterworth
Serious Buyer Only.
postage can be arranged.
Please Visit our page for more imported car parts.
[url=http://www.mudah.my/rs-enterprise]R.S Enterprise - PRO Niaga Store on Mudah.my[/url]
Special Parts can be order from Japan
We ship worldwide
if you are interested please call me at