This voltmeter has a volume of 0.28 inches, a range of DC DC 0-100V, and is applicable to 2-wire and 3-wire products. Three wires for easy access to car/battery/motorcycle interior, With reverse polarity protection, the voltmeter will not burn. It is used to monitor the battery voltage, grasp the battery voltage status in time, and can also be used for voltage measurement of other products.Note that the maximum input voltage for 2-wire use must not exceed 30V, otherwise there is a danger of burnout.
Note: The three-wire voltage range 0-100V can also be used for the second line but the voltage should be within 30V.
● It has reverse polarity protection, but it does not burn.
Measuring range: DC 4.80V-30.0V
Power supply range: No need for additional power supply, directly use the tested voltage as power supply, the same scope as above
Max input: DC32.0V Note: The input voltage higher than 32V may be permanently damaged!
Allowable error: +-0.1%
input resistance: > 100K ohm
Working current: Red < 23mA
Operating temperature: -10°C~65°C
Refresh rate: 300mS
Display method: Three 0.36" LED Digital Tubes
Display color: Red
Wire length: 15cm
Dimensions: 23 x 15 x 10 mm, length X width X thickness
SEARCH LINK FOR MORE COOL STUFF!
SEARCH LINK UNTUK LEBIH BANYAK BARANG ISTIMEWA!
CALL TIDAK DILAYAN ,WHATSAAP DAN WECHAT SAHAJA.
BUYER SEMBANG KENCANG SILA MAIN JAUH-JAUH.
MINAT BOLEH WECHAT , WHATSAAP 017-9630396