This is a 100% Original and Authentic Dremel
Product. We do not sell imitation copy..
deal for shaping, hollowing, grooving, slotting, inlaying and making tapered holes For use in soft
metals, plastics and woods especially on curved surfaces
Use the sides of the cutter (Rather than the tip) for effective cutting Great especially on curved
Tips For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit. Secure objects to a stable surface while working. Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact). If chatteringoccurs, increase speed.
BIT DIAMETER INCH: 1/8"
BIT DIAMETER MM: 3.2 mm
For more information Kindly contact
Tel : 013-9341595 @ 012-6207883 @ 03-92055282
(During office hours)
EH Global @ Touch D.I.Y
Block 10-8-8, Queen's Avenue, Jalan Bayam,
Off Jalan Peel, Cheras 55100 Kuala Lumpur,
Monday - Friday 9am-6.30pm
We accept Credit Card, Cash or Bank Transfer.