Japan Made ECOCARAT Thermal Flasks Bottle Drying Stick
Please choose one of the color: Blue, Pink or White
Quickly dry the water drops remaining in the water bottle after washing
Size: About 27x 226x 11mm
Country of manufacture: Japan
Material / component: Main Unit = Ceramic ; Cover = Silicon Rubber
Main Unit = Japan ; Cover = China
Because it is covered with silicone, you can hang it with a ring without damaging the water bottle.
After washing the water bottle, we compared the time to dry.
● When inverted (normal drying condition) → About 7 hours
● When using bottle drying stick → About 3 hours
※ It is based on our test data.
* It depends on the container you use and the usage environment.
● After cutting the water well, the one who put the stick can be used more effectively.
● Can be used for bottles of 28 mm or more in diameter.
ECOCARAT is "porous ceramics" developed by LIXIL.
Approximately five times the absorption and desorption amount of diatomite, and water absorption speed equal to or higher than that.
※ The effect varies depending on the usage conditions ・ weather ・ ventilation and other environments.
Heat resistant temperature: 200 ℃
● After use, please dry thoroughly in a well-ventilated place.
● When partial spots are attached, wipe with a chlorine bleach on a cotton swab, then rinse thoroughly and dry thoroughly.
● In case of particularly bad dirt, please place it in a diluted neutral detergent overnight, then thoroughly rinse before drying.
● Do not wash with wet cloth, sand eraser, hard sponge, gold scrubber, polish powder.
RM 7 by courier to Peninsular Malaysia
RM 11 by courier to Sabah, Labuan
RM 11 by courier to Sarawak
Ship To : Within Malaysia