Kos-120 4KW High Speed Emulsifier, Mixing Homogenizer for Cosmetic Creams and Lotions
Machine Type: Emulsifier Material: 304(L) or 316(L)
Brand Name: KOS Power: Electric
Model Number: KOS-120 Application: Daily Chemicals
Voltage: 380V Detailed Application: Cosmetics
Motor Power: 4KW IS-Customed: Yes
High shear mixer disperses one phase or ingredient (liquid, solid, gas) into a main continuous phase (liquid), with which it would normally be immiscible. A rotor together with a stator is used either in a tank containing the solution to be mixed, or in a pipe through which the solution passes, to create shear. The products could be widely applied in cosmetics, food, beverage, chemical, pharmaceutical, paint& ink industry etc. Four types of different stators are suited to different working conditions.
1. Usually installed in the kettle container, or installed in the movable or fixed bracket;
2. Usually for batch production, according to customer production requirements, design the processing capacity of each batch;
3. Bearing can be used mechanical seal, vacuum or positive pressure working conditions can be achieved in the emulsifying tank;
4. Motor and drive shaft elastic connection, standard flange base;
5. Emulsifying head optional mesh, long hole, round hole and claw type, suitable for different material viscosity, rotor/stator removable easy to replace;
6. Can be customized high-shear emulsifier and various kinds of mixers to meet a variety of process requirements;
7. Length can be customized according to customer requirements;
8. Operating temperature is less than 180℃, if the working temperature exceeds 60℃, you need to specify when ordering;
9. Can choose high-shear emulsifier with explosion-proof performance.
Cosmetic creams and lotions are used for a variety of purposes such as cleansing and moisturizing. Hydration of thickening and suspending agents and preparation of a stable emulsion are two of the most difficult mixing tasks that are usually encountered when mixing. The high shear mixing action of a KOS rotor/stator mixer can achieve these tasks and offers a number of advantages over conventional mixing. KOS stator design for claw type coupling structure, material form the host upper and lower suction at the same time to shear material from all dimensions.
Before you place an order, please contact us, we can custom make emulsifying homogenizer machine for all your request.
1. What kind of material do you want to process?
2. What's the capacity?
3. What is it used for? Mixing, dispersing, shearing or homogenizing?
Model Power(kw) Speed(rpm) Capacity(l) Standard Length(mm)
KOS-90 1.5 2800 10~50 350
KOS-100 2.2 50~100 650
KOS-110 3 50-100 800
KOS-120 4 100~200 750
KOS-130 5.5 200-600 900
KOS-140 7.5 200~800 900
KOS-160 11 500~1500 1050
KOS-165 13 500-1500 1100-1300
KOS-175 15 600-1800 1100-1300
KOS-180 18.5 600~2000 1200
KOS-200 22 1400 800~2500 1200
KOS-220 30 1000~3500 1355
KOS-240 45 1500~5000 1395
KOS-270 55 2000~8000 1600
KOS-290 75 3000~10000 1650
Different Types of Workhead:
Notes During Installation:
1, The machine of machine length (L) size for the standard length, if must be extended or shorten will be separately with manufacturing.
2, The best position selection of mechanical length for emulsification box slot in effective liquid surface 60% for best deeply.
3, Emulsifying machine please reference: the selected capacity, the viscosity, the processing time, reaction temperature, purpose, address the company business department.
4, Emulsifying machine ba-alloyed bearing the water since embellish type bearings, forbidden liquid below the water bearings with, to avoid creating start-up equipment bearing damaged.
5, Correct parameters to provide the kind prevail, data such as are subject to change without prior notice.
1, The emulsifier finished work should be promptly cleaned, immerse the work head into clear water or organic solvent, start the emulsifier to remove the retentive completely.
2, A long time not in use, you can disassemble the work head, drain the water, add lubricating grease in the sliding bearing.
3, The mixing head is strictly prohibited running out of the materials, so as not to damage the bearing.
NO SMS ......
whatsapp or call
call more other machine
capping machine / filling machine /
labeling machine / homogenizer