HISAKI Automatic Water Pump Control Switch (PC Switch)
As a completely Automatic pump controller device, it can guarantee the optimum control of electric pumps used in a plumping systems. Being an intelligent mix of hydraulic and electronic engineering. The control maintains both pressure and flow and controls the operation of the pump automatically. It needs no pressure tank as in the traditional systems. There are no plenum chambers to recharge an no irritating variation in pressure and in flow at the point of use. No adjustment or maintenance is required, it is absolutely dependable durable and simple to install.
Function: The starting operation archived. The unit is programmed to perform all the pump control operations automatically. When particular operational breakdowns occur, such as water failure, obstruction of the suction pipe, etc., the unit recognizes the breakdown and red LED failure lights up, at the same time a stop signal is sent to the pump to prevent damages caused by its working in the absence of water. Rectification of the failures that have caused the blockage, allows the system to be restarted by pressing the reset button.
Model: HSK-1 (Omron Resisto/ relay switch)
-The Electronic Controller orders the automatic
start and stop of the water pump when opening or
closing any tap or valve of the system.
-The controller can keep constant pressure and
water flow in the system as long as any tap in the
system is open during the pumps operation.
- Electronic PC switch relay Made in Italy.
Voltage: 220 - 240V / 50Hz
Maximum Current: 10 Amp
Restarting Pressure: 1.5 Bar
Maximum working Pressure: 10 Bar
Connection: 1" / 25mm
Protection Rating: IP 65
Maximum Temperature Rating: 60C
Manual Start Switch: RESET
Tension: LED POWER
Pump Working: LED ON
Security System: LED FAILURE
Special Non Return Valve to avoid surges
Security System removing the possibility of the
machine working without water.
PRICE: RM290.00 (Omron Resisto/ relay switch)
** 6 MONTH WARRANTY WITH T&C APPLY
RE: WE ARE PROVIDING PUMP CONTROLLER INSTALLATION.
INSTALLATION PRICE DEPEND ON YOUR EXISTING PUMP MODEL, ROUTE OF PIPING, MATERIALS & ELECTRIC POWERPOINTS STATUS TO PROVIDE QUOTE. CHOOSE A PROPER & PRO INSTALLATION, THAT WILL BE TREAT YOUR PUMP LAST LONGER OPERATION. NEED MORE DETAIL? PLEASE DO NOT HESITATE TO CONTACT US NOW.
Dealing method: Cash on Delivery, Courier Service
or by transportation to anywhere depend on your
location (Transportation fee is bear by buyer,
delivery fee will be charged within 15km in KL &
Selangor area). Outstation transport fee is bear by buyer.
Hydro Kinetic Sdn. Bhd.
Tel: 6 03-6263 6676
Contact : Ken, 016-9867769
Address: No.25-C, Jalan Bubut, Kepong Baru,
52100, Kuala Lumpur.
(From Kepong AEON Jusco is 5min distance only to our shop)
Thanks for viewing our ads.