HWL HI/LO Soft Hard With Body Shift Adjustable Absorber
TWIN-TUBE GAS CHARGED
Twin-tube gas charged shock absorber design is commonly used in HWL Performance Shock Absorber Systems.
The shock absorber consists of an outer cylinder body and an inner tube. Between them are filled with high grade hydraulic fluid; nitrogen gas is then charged into it. The nitrogen gas is playing an important role in the performance of the shock absorber by preventing bubbles forming in the hydraulic fluid due to over heating under rapid motions. Bubbles (air) is compressible, therefore causing sloppy damping performance, which can be prevented by charging nitrogen gas into the cylinder.
ACCELERATION SENSITIVE DAMPING
The specially designed piston valves moved within the shock absorber inner tube adjusted themselves according to the road conditions. During demanding driving conditions, when the shock velocity is high and rapid, the piston valves reacted accordingly thus the vehicle handling is improved.
Therefore, HWL performance shock absorbers is fast response and keep the tires on the ground in fast corners, yet providing exceptional comfort on everyday driving.
The front shock absorber system is mostly the coil-over type, which basically consists of coil spring and shock absorber (damper).
HWL performance shock absorber has another feature that allow you to adjust the height of the vehicle to suit different driving conditions. At the same time, changing the traveling distance of the coil spring to achieve desirable spring stiffness.
In some cases, the height of the vehicle can be adjusted without adjusting the spring height. This can be done by using our BODY SHIFT found on some of the HWL performance shock absorber systems.
The whole shock absorber cylinder body is shifted vertically by adjusting the cylinder body housing. So the height of the vehicle can be adjusted, without affecting the spring damping rate and spring traveling distance.
REAR HEIGHT ADJUSTABLE SHOCK ABSORBERS
Beside the coil-over type of suspensions which are commonly used on today's front wheel drive vehicles; the trailing arm with torsion beam type of rear suspensions set up is also widely used on a lot of the Japanese cars, such as Honda Fit/Jazz/City, Toyota Yaris/Vitz/Vios etc.
HWL has specially developed adjustable shock absorbers system for cars with this kind of rear suspension set up.
- 1 Year Warranty
- 24~26 Step Soft Hard Adjusting level
Suitable For HONDA CIVIC ES 1.7.
Bakuso Racing Sdn. Bhd.
No.21, Jln PJS 11/24,
47500 Subang Jaya.
Operation Hours: 9am~7pm
GPS: Latitude 3.066973, Longitude 101.601657
Same row with Kedai Tayar Silverstone Teck Meng,
REV PERFORMANCE, Millennium, 2 shops beside
For serious buyer please Whatsapp Or SMS
SH 017-396 8567
Amanda 012-206 1409
Email us : email@example.com/ firstname.lastname@example.org
Dealing method :
Pos/Courier everywhere in Malaysia including Sabah, Sarawak, Brunei, Indonesia, Thailand, Singapore and all area in Asian.
- Bank Transfer
- Online Payment
- Credit Card
- Debit Card/ATM Card
- Lucky Transport
- BrightStar Logistics(East Malaysia)