2 items 40 Pixels POI full Color Led Stick programmable
nunchuck USB Graphic POI Speeches show wand
Programe data loading process
1. prepare enough materials for photos.
· Double tap POI to enter the image editing software. (If the computer operating system win7 win8 offer to execute as an administrator)
· Changing the image and displaying the time.
· Input to generate file and image data path.
· The input time file and the path that will be generated.
· Click on the preview window, you can see the number of each image that is individually displayed once, until the last one. At this time, image data files and data files are automatically generated.
If the conversion process, the computer has a periodic machine phenomenon, can be re-converted to generate.
· If you need to edit the generated other data files, repeat 2.1-2.4. You do not have to exit the POI image editing program.
3. Data transfer download
A drive was successfully installed to confirm the USB module.
Double click poicomm, enter the data download software. (If the computer operating system win7 win8 offer to execute as an administrator)
· Connect the data cable, turn on the power rods.
· Select the COM port and press Open to open it.
· Click picfile, select Open to prepare the image data file to be loaded.
· Press picsend to start downloading image data.
Note: the download image will be the USB Flash Module Startup Flash Module for the memory format, there is a green light to move on for 25 seconds after the rods, indicate that the downloaded data is downloaded.
4. Green about 90 seconds for the download of the download end is finished.
· Click timefile, select the open preparation time for loading data files.
· Press timesend to load the time data.
Note: boot time, will start USB flashing lights were on the module, about 7 seconds data download is complete.
Repeat 3.1-3.6 you can download the full data of different rods.
Finally, remember about clicking Close to exit the program earlier.
call or whatsapp