Read more Read less
MAPEI NOVOPLAN 21
WHERE TO USE
Novoplan 21 is used for levelling and smoothing new or existing substrates and provides an underlayment for receiving PVC, linoleum, rubber, cork, textile and non-woven flooring in areas where a good resistance to loads and traffic in offices and public areas is required.
Novoplan 21 must only be used in interior conditions in thicknesses from 1 to 5 mm.
Novoplan 21 is a grey powder comprising of special fast-setting and hydrating cements,
specially graded silica sand, special resins and additives prepared and developed in the MAPEI research laboratories.
When mixed with water, Novoplan 21 becomes a very fluid, easily workable mix with excellent self-levelling properties and cures rapidly.
Novoplan 21 can also be applied with an appropriate pump.
Novoplan 21 is strong enough to withstand wheelchair traffic.
Novoplan 21 can be applied in thicknesses up to 5 mm per single coat without significant shrinkage that might cause cracks or crazing.
Once completely dry Novoplan 21 has good compressive and flexural strength as well as resistance to impact and abrasion. Flooring can be installed once Novoplan 21 has dried, after 24-48 hours, depending on the thickness, temperature and moisture of the environment.
Packaging 25kg bag