Read more Read less
Myvi Bezza Axia Oversized RSS Sport Brake Kit
Original RSS Sport Bolt-On Big Brake kit
- RSS Sport disc rotor with slotted & cross drilled face type
For : Front Use Only
Accept trade in old brake caliper
Price is not included installation labor fees
Brake Kits Contents:
- RSS Sport rotor .....(Brand New-2pcs in a box)
- 500 degrees Brake pads .....( Brand New-4pcs in a box)
- Reconditioning Caliper .....(Recond -2pcs in a box)
- Mounting Bracket .....(Brand New-2pcs in a box)
Required per-purchase fitment check for wheel fitment
Product detail and Specification
Brake Caliper - Big Honda Nissin Floating brake caliper with big piston bore
Brake Disc - PCD 100 x 4 holes direct plug n play disc
Option Disc for choose:
Size 1 : 11 Inch Slotted and Crossed Drilled with Dia. 275mm x 22mm thickness (Only 5.9kg best mass for heavy duty) Min Rim : 15 inch wheel
Size 2 : 10 Inch Slotted and Crossed Drilled with Dia. 255mm x 22mm thickness (Only 4.9kg best mass for light weight) Min Rim : 14 inch wheel
- Bigger that Oem Dia 234mm x 16mm(myvi 1st gen) 18mm(myvi 2nd gen)
Brake Pad - Pad depth 55mm vs OEM 34mm.(more life that original )
*please inquiry for more detail from Ken 012 827 6800
Premium brake pads
Features & benefits:
- It's provide the ideal vehicle control and great responsive performance.
- Keep maintain the enhanced pedal feel of braking performance with brake pads.
RSS Sport Performance Brake disc kits
Featured & Benefits:
-Smooth casting that are finished to higher standards and high precision machining specifications to Fits the original equipment with mill balancing and double disc ground finishing. double disc grinding ensures parallelism, eliminates run out and provides near perfect disc thickness variation (DTV).
(New RSS rotors DO NOT need machining.,– ready to be installed right out of the box)
-Chamfer cross-drilled and rounded slotted braking surface design improve initial bite and continuous refreshing of the brake pad surface to control glazing, and debris (glazed pad emits a reflective surface and can cause a reduction in the braking performance due to excessive temperatures or excessive harsh braking)
- Wear indicator shows when the rotor needs replacement
- Maintains consistent stopping power with full control and confident braking with short stopping distances
-Improve cooling, dissipation of heat and gases to reduce brake fade
(During long mountain descents, stop-start traffic and panic-stop braking temperatures can reach 650oc and above)
- Improved Wet Weather Braking performance
-Solve problem like Brake pedal pulsation (not to be confused with normal ABS operation), squealing, judder, warp disc (DVT), grinding noise, low brake pedal height, vehicle pulls to the left or right when brakes are applied and pedal feel
RSS Sport Brake Tech Tips:
*After install a new RSS disc, recommended perform a Run-out check.
-special tools needed-a Dial indicator gauge or dial test gage and holding fixture
-measure the run-out point at 5-10mm from outside disc diameter
-Total disc run-out should not exceed maximum allow OEM specification, recommended run-out not exceed 30 micro/0.030milimeter. If the figure is exceeded, the cause must be eliminated. Obviously, below 10micrometr/0.010milimeter is the ideal number
Use specific lubricate for caliper slides, guide bolt and rubber components, recommended OEM rubber grease, Bosch rubber grease, PBR rubber grease or equivalent silicone based lubricant.
DO NOT use a petroleum based or spray adhesive product for rubber product.
Lubricate all hardware rubber components and all metal to metal
contact points with OEM lubrication paste, Molykote® M-77
or equivalent higher temperature solid lubricant paste.
Give caliper slides and disc pad shims/insulators a thin film of lubricant. This will allow the shim to withstand normal brake pad movement without damage to the shim. Additionally, this helps dampen vibration.
Make sure the disc pads are proper sitting in the caliper and torque all the caliper bolt to the specific torque spec.
Check the adjustment of the rear brakes. Adjust if necessary.
After cleaning all wheel hub
mating surfaces, install the wheels. Make sure they are torqued to manufacturer's specifications.
-My Store (PJS5 Petaling Jaya)
-Bandar Sunway (Petron Petrol Station)
-KFC Kuchai Lama
Delivery or postage can be arrange :
-make arrangements for location delivery or postage
*Please contact me if you need any further information*
012 827 6800 Ken (call/sms/whatsapp)
012 388 2681(whatsapp only)
No 17 Pusat Perdagangan Pjs(PJCC)
Jln PJS 5/30,PJS5
46000 Petaling Jaya