Get 1 set of Myvi Old Model 2006-2011 Front Brake Caliper Pin at RM55. Free shipping (W. Malaysia). For East Malaysia, just top up another RM3 for Poslaju courier charges.
COD service is available near Menara PGRM, Cheras. Please call or whatsapp 012-2575928/Alan.
The pins will be shipped via Poslaju.
MYVI OLD MODEL 2006-2011 FRONT BRAKE CALIPER PIN COMES WITH SILICONE BUSH
The "Kok-Kok" noisy sound is a very common problem that happens in most of the Myvi old model cars. This happens because the caliper screw holes in the front wheel brake system were worn out and become bigger. This causes the caliper pins vibrate heavily and hence produce the noisy sound.
The solution to this problem is to take out the 4pcs original caliper pins (2pcs on right wheel & 2pcs on left wheel) and replace with 4 new caliper pins that come with silicone bushes. These silicone bushes are designed to refit the caliper screw holes that were worn out and become bigger. After replacing the caliper pins, the caliper pins vibration level will be minimised and the "Kok-Kok" noisy sound will also disappear.
In this case, Myvi Old Model 2006-2011 Front Brake Caliper Pin Comes With Silicone Bush is designed to get rid of the annoying "Kok-Kok" noisy sound by repairing the worn out caliper screw hole by using the silicone bushes. The pin is made of high tensile steel which is very hard and rigid. These caliper pins are machined by using CNC machine which is capable of machining the pins very precisely to meet the required dimensions. Besides, they are also chromed nicely to prevent the rusty problem. On top of that, the silicone bushes are capable of resisting high heat that will ensure the caliper pins last longer than the caliper pins that come with O-Ring.