Used. Good condition
The Nippy 3 is a pressure controlled, positive pressure ventilator. It compresses ambient air and delivers it to the patient through a close fitting nasal mask or a tracheotomy. The output pressure, timing and alarms can be adjusted by controls on the fascia panel. The Pressure, estimated Tidal Volume, Rate and all settings are displayed on a colour LCD(Liquid Crystal Display) screen.
There are 4 modes of ventilation:-
1. CPAP (Continuous Positive Airway Pressure)
Constant positive pressure is applied via the mask. No respiratory support is given in this mode.
2. Pressure Support
IPAP (Inspiratory positive airway pressure) and EPAP (Expiratory positive airway pressure) are set by the physician. The ventilator augments the patient’s spontaneous breathing. Ti is limited to half of the back-up
period, up to a maximum of 1.5 seconds and minimum of 0.7 seconds. If the patient’s breathing rate falls to the back-up rate, a timed breath (Ti back-up) is initiated at the back-up rate.
3. Pressure Control
IPAP, EPAP and Ti are set by the physician. A timed inspiration is cycled by the patients inspiratory effort. Adjustable back-up rate takes over in the absence of inspiratory trigger.
IPAP and Ti are set by the physician. A timed inspiration is cycled by the patient’s inspiratory effort. Patient exhales to atmosphere via an exhale valve fitted in the breathing circuit. EPAP is not used in this mode. Adjustable back-up rate takes over in the absence of inspiratory trigger.
More details ate http://www.nippyventilator.com/products/nippy-3/
Quantity 1 unit