Directions: NPX Bioplastics are best installed in a fluidized filter like the PhosBan reactor 150 or 550, but they may simply be placed in a media bag in a filtration compartment. Use 100 ml Bioplastics per 100 L (approx 25 gallons). After 2-4 weeks, nitrate and phosphate levels will decrease. because NPX Bioplastics are slowly consumed, more pellets have to be added periodically. Observe the level of media within the filter and top off as necessary about every 3-6 months. For aquaria with heavy feeding, higher quantities can be used, but the accumulation of phosphate from the food may require the combined use of NPX Bioplastics and PhosBan granular ferric oxide media, in separate reactors.
Caution: Maintain sufficient water flow through NPX Bioplastics to prevent production of hydrogen sulfide gas. Employ strong water circulation, aeration, and/or a surface skimming overflow in the aquarium to maintain high levels of oxygen saturation when using this product because of the strong influence it has on oxygen saturation. The use of NPX Bioplastics in marine aquariums must be accompanied by the use of a protein skimmer to achieve the export of bacteria and assimilated nutrients. It is not necessary for the outlet of the filter containing pellets to be positioned near the intake of a protein skimmer, but it is necessary to have a protein skimmer running on the system