Nitro OBD2 Chip Tuning Box Interface Plug and
Drive for Diesel Cars 4 Colors
What is the ecoOBD2?
ecoOBD2 is a Plug&Drive Ready device to
function the reducing fule consumption for the
economy and lower emission for the world. ecoOBD2
fits all car from the year of 1996. It works based
OBD2 protocols as remapping the car's
computer ECU. After driving 200 km road total,
ecoOBD2 adjust itself to the car, according to the
drivers habits and always keeps remapping the ECU
to save fule lower and immission.
What is the nitroOBD2?
nitroOBD2 IS a Plug&Drive ready device to
function the increasing the preformance of engine.
nitroOBD2 fits all car from the year of 1996. It
works based OBD2 protocols as remaping the
car's computer ECU. After driving 200 km road
total, nitroOBD2 adjusts itself to the car,
according to the driver; habits and always keeps
remaping the ECU to increase the performance of
Installation and Calibration
Pull the Car Key out from the ignition.
Find OBD2 connector(*) in your car and Plug in
Insert the key into the ignition and twist the key
to the first stage. (Do not start the car)
Press the reset buttom for about 5 sec. After
releasing the buttom, just wait for a while about
30-54 sec. (EcoOBD2 will communicate and establish
connection with ECU)
Start up the engine.
EcoOBD2 will recognize your vehicle and your
driving habits, after around 200 km/150 miles
driving and thus EcoOBD2 will adjust itself to
match your car perfectly for more fuel saving.
Weight : 40 g
NOTICE: four color optional, the default blue, if
you need other colors, please contact us first,
thank you for understanding
E1919--Blue: diesel cars/ecoOBD2
E1920--Green: benzine cars/ecoOBD2
E1921--Red: diesel cars/nitroOBD2
E1922--Yellow: benzine cars/nitroOBD2
1 x OBD2 Chip Tuning Box Interface
COD Shah Alam