USB-FP1, USB-AFP8550 Programming Cable for
Panasonic Nais FP1 PLC,Support WIN7
(pic 2 :NEW Smart USB-FP3/FP5,USB-AFP8550
Programming Cable for Panasonic Nais FP3/FP5
PLC,Support WIN7....... 599rm )
Application:Nais / Panasonic FP1 PLC
Gross Weight:0.30 kg
Working Temperature:-20~75 C
This USB-FP1 cable is a suitable replacement of
USB programming cable for Panasonic FP1 series
This cable simulate USB port as traditional serial
port (usually COM3), which enables
existingprogramming software to communicate
through simulated traditional port and PLC
devices. Embedded with this cable is the
necessary data conversion equipments to
communicate between PLC end to and PC USB end.
Support FPSOFT V1.1 and above.
Support Windows 7/2000/Windows XP
(WinNT4/95/98/Me/DOS NOT SUPPORTED).
baud rate: 300 bps ~ 1Mbps automatically adaptive.
USB bus-powered, with current consumption of 50 mA
Support UART data format: Data bit: 8, stop bit:
1, 2, Parity: odd / even / no parity
Compatible with USB V1.1 and V2.0
Reliable performance & reasonable price
USB device drivers should be installed
before using programming cable, which are
available on the CD-ROM sold together with the
cable. And for the specific installation steps,
please refer to the instruction files on the
CD-ROM drivers, and details are not necessarily
After completing Driver installation, the
corresponding COM port for the programming cable
will be displayed in the Device Manager of Window.
The step next is just to choose this COM port in
the programming software and other application
software and keep other communication parameters
as in the Default settings. And the following
steps are exactly the same as in the traditional
programming cables with RS232 interfaces.
1 x USB-FP1 PLC Programming Cable
1 x Software CD
Serious Buyer only....
Call or WhatsApp
Call after 12pmm busy morning
other model product
Panasonic Nais FP1 PLC