RCB Fiberglass Repair Kit 150gm/ 1Kg/ 10Kg
150GM RM 28.00
1KG RM 98.00 (need special order take time about 2-3days)
10KG 580.00 (need special order take time about 2-3days)
our website: www.hntcentre.com
RCB Fiberglass Restoration is a complete epoxy-based kit for birdging holes and rusted areas in metal, wood and fiberglass. The kit includes one can of resin, one bottle of hardener fiberglass cloth, spreader.
Product Benefits :
-Easy to use
-Everything required for repair is included
-Easy to follow instructions
-Repairs can be made in 30 minutes
Directions For Use :
1) 150g Kit contents : 1 can resin-150Gram., 1 bottle hardener, 1 brush, fiberglass cloth-12" x 12"
1) 1Kg Kit contents : 1 can resin-1Kg, 1 bottle hardener, fiberglass cloth-1 Meter x 1 Meter
1) 10Kg Kit contents : 1 can resin-10Kg, 1 bottle hardener, fiberglass cloth-1 Meter x 1 Meter x 10pcs
1.) Prepare damaged area by removing any oil, grease, tar, dirt, etc. from the repair area. Sand the affected area to at least 1 inch beyond the damage.
2.) For cracks that may continue to expand, drill a small hole at each end of the crack.
3.) Clean the area with alcohol. Cut the fiberglass cloth to fit within the sanded area and tape down with masking tape so cloth does not move.
4.) Mix the resin as follows : Pierce the seal in the head of the tubes using the back of the cap. Squeeze out equal amounts of resin and hardener on a disposable surface. Mix with mixing stick until a uniform colour is achieved. Mix only what is necessary to complete the repair.
5.) Use the plastic spreader to saturate the cloth with the mixture. Spread the mixture evenly over the entire cloth.
6.) Remove the tape holding the cloth in position and overlap the edge of the cloth. Spread the remaining mixture over the fiberglass until it is completely saturated. Taper the areas of the repair beyond the fiberglass. Smooth the repaired area using the spreader.
7.) Allow the repaired area to cure overnight. Use sandpaper to feather the edges and smooth the patch for painting. Repair will be completed when the resin cures in 12 hours or overnight and may be primed and painted at the time.
We always try to keep all the item in stock
1. Item will be shipped once payment received
2. Cash & carry at any of our branches (Self collect allowed)
3. Providing delivery services in Malaysia
(Peninsular & East Malaysia by Citylink/ Pos Laju/ GDex/ Parcel & ... )
(All Price are GST Included)
1. Puncak Jalil (HQ) SATA & NIPPON Signboard
(same row with Mydin Puncak Jalil)
26, Jalan PUJ 3/2, Taman Puncak Jalil, 43300 Seri Kembangan, Selangor
Tel: 016-5584670 Fax: 03-89402362
Google Map: https://goo.gl/maps/bjyUti2fdvH2
2. Cheras Bandar Sri Permaisuri SATA & DULUX
Signboard (same row with JPJ Permaisuri)
9, Jalan Sri Permaisuri 8, Bandar Sri Permaisuri, 56000 Cheras, KL
Tel: 016-6785941 Fax: 03-89402362
Google Map: https://goo.gl/maps/GXdjfRzpm8m
Mon - Sat : 10.00am - 6.00pm
Sun & Public Holiday: Off