Rear Proton Persona RSS Sport Disc Brake Pad Kits
Original RSS Sport Disc Brake Pad Kit
- Genuine RSS Sport disc with premium brake pads
For : Rear Axle use only
- Persona All Model
- RSS Sport rotor .....(2pcs in a Box)
- Premium brake pads .....(4pcs in a box)
*top-up RM80 upgrade to high temperature Extra-mu pads (0°-500°C)
**Price not includes installation
RSS Sport Performance Brake disc kits
Featured & Benefits:
-Smooth casting that are finished to higher standards and high precision machining specifications to Fits the original equipment with mill balancing and double disc ground finishing. double disc grinding ensures parallelism, eliminates run out and provides near perfect disc thickness variation (DTV).
(New RSS rotors DO NOT need machining. ready to be installed right out of the box)
-Chamfer cross-drilled and rounded slotted braking surface design improve initial bite and continuous refreshing of the brake pad surface to control glazing, and debris (glazed pad emits a reflective surface and can cause a reduction in the braking performance due to excessive temperatures or excessive harsh braking)
- Wear indicator shows when the rotor needs replacement
- Maintains consistent stopping power with full control and confident braking with short stopping distances
-Improve cooling, dissipation of heat and gases to reduce brake fade
(During long mountain descents, stop-start traffic and panic-stop braking temperatures can reach 650oc and above)
- Improved Wet Weather Braking performance
-Solve problem like Brake pedal pulsation (not to be confused with normal ABS operation), squealing, judder, warp disc (DVT), grinding noise, low brake pedal height, vehicle pulls to the left or right when brakes are applied and pedal feel
RSS Sport Brake Tech Tips:
*After install a new RSS disc, recommended perform a Run-out check.
-special tools needed-a Dial indicator gauge or dial test gage and holding fixture
-measure the run-out point at 5-10mm from outside disc diameter
-Total disc run-out should not exceed maximum allow OEM specification, recommended run-out not exceed 35 micro/0.035milimeter. If the figure is exceeded, the cause must be eliminated. Obviously, below 10micrometr/0.01milimeter is the ideal number
Lubricate caliper slides, shims and rubber components.
Use silicone based lubricant or equivalent before installation
DO NOT use a petroleum based or spray adhesive product.
Lubricate all hardware rubber components and all metal to metal
Give caliper slides and disc pad shims/insulators a thin film of lubricant. This will allow the shim to withstand normal brake pad movement without damage to the shim. Additionally, this helps dampen vibration.
Make sure the disc pads are tight in the caliper and torque the caliper to the housing.
Check the adjustment of the rear brakes. Adjust if necessary.
After cleaning all wheel hub
mating surfaces, install the wheels. Make sure they are torqued to manufacturer's specifications.
Extra-Mu brake pad
Featured & Benefits :
- Consistent performance
- Disc friendly, low noise, good pedal feel
- Friction coefficient of 0.42
- Working temperature range of 0°-5000°C
Premium brake pads
Features & benefits:
- It's provide the ideal vehicle control and great responsive performance.
- Keep maintain the enhanced pedal feel of braking performance with brake pads.
-My Store (PJS5 Petaling Jaya)
-Bandar Sunway (Petron Petrol Station)
-KFC Kuchai Lama
Delivery or postage can be arranging:
-make arrangements for location delivery or postage
*Please contact me if you need any further information*
012 827 6800 Ken (call/sms/whatsapp)
012 388 2681(whatsapp only)
No 17 Pusat Perdagangan Pjs(PJCC)
Jln PJS 5/30, PJS5
46000 Petaling Jaya