LAMPU 30 LED USB RECHARGEABLE MOTION SENSOR LiGHT

List-ID: 78168144Yesterday 18:09
  • Description
  • Specification
  • READY STOCK!!!
    ALL NEW ITEM
    1ST COME, 1ST SERVE
    SERIOUS BUYER ONLY




    Code : 30 LED (3 MODE)



    Product description
    30 LED motion sensor wall lights use passive infrared technology with 120-degree omnidirectional motion sensing. It can be installed indoors and outdoors, without wiring and without holes. Make your life bright and convenient.

    [3 Secondary dimming mode] : Press the [123] button to adjust the brightness: 10LED, 20LED, 30LED brightness, the indicator light will turn green and blink, and the human motion in night light can be detected. When a movement within 10ft / 120 is detected, the LED wall light will immediately light up. If no motion is detected, the light automatically turns off after 15 seconds.

    [Always on mode] : Press and hold the button labeled [123] for three seconds, the indicator light will turn red, and it is always on. You can use the wireless motion sensor LED light as a flashlight and table lamp.

    It remembers your last brightness setting and doesn't need to be adjusted every time to keep your child safe.

    Note: When the LED wardrobe light is blinking, it proves that the battery is low and needs to be charged.



    Motion sensor mode:
    1. Do not install 2 lights too close to each other. Light may cause another DOES to not work.
    2. This light can only be turned on in a dark environment.
    3. PIR dimming mode: press the [123] button to adjust the brightness: 10LED, 20LED, 30LED brightness, the indicator light flashes green, and the human motion in night light can be detected. When a movement within 10ft / 120 is detected , the LED wall light will immediately light up. If no motion is detected, the light automatically turns off after 15 seconds.
    4. Constant lighting mode: Press and hold the button labeled [123] for three seconds, the indicator light flashes red to activate constant lighting mode, and you can use the wireless motion sensor LED light as a flashlight and table lamp.



    Wireless installation: magnetic LED lights, easy to install and remove, no additional tools required. Use the supplied magnetic tape to stick it anywhere. When you need to charge, you can remove the lamp under the cabinet at any time. The original intent of our Zeutch is "light up anytime"Durable and environmentally friendly: Our premium motion sensor lights are made from an aluminum alloy housing that is durable and stylish. The motion sensor light has a built-in rechargeable battery, no additional AAA battery is needed, energy saving and environmental protection, saving money . When the LED closet light blinks, it proves that the battery is low and needs to be recharged.

    Scope of application: This multifunctional cabinet light is very suitable for bedrooms, bedrooms, cabinets, corridors, workshops, basements, garages, stairs, fuel tanks, doors, garage entrances, hotels, camping, night reading and other places.


    Constant lighting mode: Press and hold the button labeled [123] for three seconds, the indicator light flashes red to activate constant lighting mode, and you can use the wireless motion sensor LED light as a flashlight and table lamp


    Specifications:
    Size: 186 * 32 * 20mm
    Product weight: 165g
    1. Induction method: human infrared sensor
    2. Induction control: built-in light sensor
    3. Induction distance:> 3m
    4. LED quantity: 30pcs
    5. Induction angle: 120 degrees
    6. LED life: more than 80,000 hours
    7.LED brightness: 350 lumens
    8. Light color: white light
    9. Working current: 120 mA (60 mA for white light)
    10. Working voltage: DC3.7V
    11. Lithium battery: 1000mAh (A product battery, sufficient quantity)
    12. Battery use: 500 times of charge and amplification
    13. Battery full use times: more than 600 times
    14. Delay time: 15 seconds
    15. Operating temperature of lamp: -10 ~ 50 ℃
    16.Shade Material: Aluminum ABS
    17.Power and Plug Description: battery-powered
    18.Switch Installation: Type 3m sticker


    Package Include:
    1 x Motion Sensor Closet Lights
    1 x Magnetic 3M tape
    1 x USB cable
    1 x User Manual




    =================
    Terms & Conditions:
    =================
    MINIMUM PURCHASE FOR COD RM25



    ============
    Postage Cost :
    ============
    Poslaju/J&T : Peninsular RM5.00, Sabah Sarawak RM10.00
    (Combined Shipping Allowed)




    WhatsApp [ONLY] : https://wa.me/ 6
    WhatsApp [ONLY] : https://wa.me/ 6
    WhatsApp [ONLY] : https://wa.me/ 6
mudah_safety_tip

Mudah Safety Tip

Reminder! Our staff will NEVER reach out to you through other platforms or channels outside of Mudah.my. Find out more safety tips in MudahSafety!

Do you find this ad suspicious or inappropriate?
Report this ad (List-ID: 78168144)
Is this your ad? Manage it using these links.
Loading...
Price
RM 28
Location
Kedah - Others
Condition
New
Share this ad