Antisol A is a water-dispersed acrylic copolymer based curing compound. It is ready for use and simple to apply. Antisol A will form a thin film, covering the surface of the concrete to prevent premature water loss due to evaporation.
Antisol-A is sprayed onto newly placed concrete surfaces to form a thin film barrier against premature water loss, without disturbing the normal setting action. Antisol-A is suitable where subsequent surface treatments such as screed, protective coating, decorative paint, etc. are required.
Characteristics and Advantages
Antisol-A provides the following beneficial properties to concrete surfaces:
Reduces incidence of plastic cracking
Increases frost resistance
Replaces labour intensive curing methods such as wet-Hessian, watering, etc.
Can be overcoated without affecting the bonding of the subsequent application (concrete surfaces to be washed prior to overcoating in accordance with normal practice)
Will not re-emulsify in contact with water therefore allows overcoating even where back pressure of water is expected
Tested for use in contact with drinking water
Colour: Milky white liquid
Packaging: 20 litre pails and 200 litre drums