Dark color T shirt transfer paper SALES/A4 SIZE
transfer paper SUBLIMATION paper FOR HEAT PRESS
A4 SIZE Dark color T shirt transfer paper
,Sublimation Paper for dark T-shirt, Inkjet paper
Type: Heat Transfer
Material: White Paper
Inkjet heat transfer paper dark color thermal
Suitable for printing:
Color to dark color cotton, a half cotton cotton
Size:210 mm x 297 mm
Advantages:All series of inkjet printer can be
You can useOrdinary ink. special ink, pigment ink.
Original introduction of the origin of ink-jet
printing personalized printing, thermal transfer
paper, is the world recognized as high quality
special T-shirt transfer paper. Can through the
ink jet printer the image easily
This text printing, fully restore the color of the
images and bright degree, don't have to color
correction. After printing feel is ultra-thin,
full penetration, photo elastic, pull is not easy
to tear, wash water will not rub off, not to take
. Make the wearer has fine feeling comfortable
transfer paper (dark color)Instruction manual no.
This product is import the original paper,
suitable for the printing pattern on the clothes
of light color, can use heat sublimation ink and
ordinary ink (water-based dye ink or paint).
Through the transfer paper transfer pattern color
reduction degree is high. The color saturation.
Bright image detail and clear. Good glossiness.
Stable quality. Not wrinkle, elastic, tear not
craze, feel is good, no sense, its quality is out
of reach for homemade T-shirt transfer paper. Is
heat transfer T-shirt. Printed t-shirts
personality the best choice!Can be transfer in
light cotton. CottonOr polyester. Polyester,
containstThe T-shirt.Hat. Bag. Mouse pad.
Sportswear. Sweater, etc. Water to wash off don't
A. Design print:
1.Design with an inkjet printer to print directly,
can useSublimation ink,Weak or solvent inkOrdinary
ink, water-based dye and pigment ink).
2.Can also use crayons. Oil paints. The
fluorescent pen. The free scale design such as
3.Such as available most of the printer: Epson
Stylus C82, C84, color 1520 k,
3000, Photo 890, R200 Pro4000, Pro7600, Pro9600,
HP/Hewlett - Packard 1000 Inkjet Printer, Canon
ink jet Printer, etc..
4. According to the instructions on the use of the
printer to choose the appropriate printer setup,
EPSON printers, for example,Set the printer as
photos(P),Options for ordinary paper, using the
image to print.
5.Finished printing let stand natural drying.
2. Transfer printing method:
1. Cut out the print pattern, on the edge of the
print design to keep 5 mm white edge, to prevent
2. Because of the limitation of iron on calorific
value in transfer printing A4 size (20 cm by 30
cm) above items, electric iron must be able to
move, and the greater the power, the better.
3. The first dispatch iron to cotton fabric file
(about 190 ), preheating and heat preservation
indicator, shut off the steam. Inadequate or use
steam temperature will affect the heat transfer
4. Select smoothly. The surface of the inelastic
(such as wooden stools) as transfer workbench.
Suggest not to use domestic ironing board, because
of the elastic, adhesion is not conducive to
5.Keep your clothes clean and tidy before transfer
printing, flat on the ironing boards, clothes
irons to be printed on the part of hot.
A few seconds to remove moisture.
6.Suitable for white or light colorCotton or
polyester fiber such as textile, don't transfer
printing black clothing.
7.Will transfer paper printing face down, flat on
the stamping parts, to doIron across the copy
paper or ironing gauze for ironing. Please set
electric iron temperature to the highest. After
reaching the highest temperature, start ironing,
the image transfer will be low if the iron
temperature is not enough, easy to fall off. Be
careful not to use steam, the water vapor will
affect the heat transfer effect.Freely back and
forth to the ironing, pressing pressure, as far as
possible when time keep in about 20 seconds,
depending on the pattern size flexible time. Try
to use the iron the back half of the (because of
the second half of the higher temperature), and
the heat transfer was especially hard edges.
8. If you want to achieve the best effect of
transfer printing, it is recommended to use
pyrograph machine, set pyrograph machine
temperature is about 185-195 , the 20-30 seconds.
9. The hot tearing (After ironing, strike and tore
back paper torn off) or warm or cold tear,
transfer to complete.
1. General please wash after the transfer is
completed within 24 hours. If you use normal ink
please within 48 hours after washing.
2. Wash clothes turn to negative, do not use hand
to rub the surface of the T-shirt design.
3Suggest using ordinary detergent, wash separately
in cold water, cannot be mixed in conjunction with
other clothes to wash, do not dry clean, do not
4.Ironed after washing:
1Immediately. After washing, dry or drying machine
to dry, do not put the t-shirts in the sun
& have spent& have spent2If wrinkles in
clothes need, after air temperature can be used in
steam ironing (not hot iron containing elastic
fiber, so as not to damage the organizational
structure of the elastic fibers, elastic clothing
effect).Fall off after washing, if the image has a
sign, the back paper covering on the image,
ironing bonding again. Do not use the iron ironing
transfer printing part directly.
3After ironing, don't put clothes into a small
space, can use hangers hanging or split, in order
to keep the clothes smooth shape.
5.Matters needing attention
Printing paper the preservation of the
environment: 35-65% relative humidity, temperature
is 10 to 30 .
A4-50 (210 mm X 297 mm)zhang/package, A3 (297 mm X
420 mm) - 50zhang/package
A (8.5 "X11") - 50zhang/package, B (11
X17 ' ' ' ') - 50zhang/package
And 17 'X30M /volume,Other specifications can be
160pcs ... rm1399
Serious Buyer only....
Call or whatsapp
Call after 12pm,busy morning
more other water Transfer activator