CALL WECHAT WHATSAAP 017-9630396
Get ice Frost cold under a minute, used for numerous applications from CPU coolers to alternate power sources, or even for your own DIY project. These devices module must be used with a heat sink to avoid burn up.Thermoelectric coolers operate by the Peltier effect (which also goes by the more general name thermoelectric effect). The device has two sides, and when a DC electric current flows through the device, it brings heat from one side to the other, so that one side gets cooler while the other gets hotter. The "hot" side is attached to a heat sink so that it remains at ambient temperature, while the cool side goes below room temperature. In some applications, multiple coolers can be cascaded together for lower temperature.
Some benefits of using a TEC are:
1)No moving parts so maintenance is required less frequently
2)No chlorofluorocarbons (CFC)
3)Temperature control to within fractions of a degree can be maintained
4)Flexible shape (form factor); in particular, they can have a very small size
5)Can be used in environments that are smaller or more severe than conventional refrigeration
6)Long life, with mean time between failures (MTBF) exceeding 100,000 hours
7)Controllable via changing the input voltage/current
Size: 40mm x 40mm x 3.8mm
Standard Voltage : 12V
Voltage Umax (V) : 15.5V
Current Imax (A) : 4-6A
Power QMax (W) : 72W
Note: Words are hot, no words are cool
1x TEC1-12706 Thermoelectric Cooler Peltier Module
SEARCH LINK FOR MORE COOL STUFFS!
SEARCH LINK UNTUK LEBIH BANYAK BARANG ISTIMEWA!
CALL TIDAK DILAYAN ,WHATSAAP DAN WECHAT SAHAJA.
BUYER SEMBANG KENCANG SILA MAIN JAUH-JAUH.
MINAT BOLEH WECHAT , WHATSAAP 017-9630396