Designed for flasholics only, ThruNite TN32 UT LED Thrower Flashlight adopts an advanced CREE XPL HI LED to give max output up to 1150 lumens and features smooth reflector to give perfect beam and throw.
The TN32 UT also has a streamline design and very beautiful body, with the bass circuit warehouse to provide better heat dissipation performance.
Moreover, it weighs only 653 grams and is very convenient to carry on, making it ideal for tactical, searching and rescue purposes.
Features and Specifications
Adopts advanced CREE XP-L HI LED with a lifespan of 20+ years of run time.
Bass circuit warehouse provides better heat dissipation performance.
Runs on: 3 x 18650 batteries (not included).
Max output: 1150 lumens.
Max beam distance: 1043 meters.
Peak beam intensity: 272000 cd
Working voltage: DC 8V-13V.
Output & Run time (Tested with 3 x 18650 3400mAh)
Firefly mode: 0.4lumens (40days)
Medium: 178lumens (21hrs)
738lumens (3.8hrs), 1150lumens (2hrs), Strobe (1150lumens /6hrs).
Aircraft-grade aluminum body with Premium Type III hard-anodized anti-abrasive finish.
Toughened ultra-clear glass lens with anti-reflective coating.
Smooth reflector gives perfect beam and throw.
Reverse polarity protection design to well prevent from improper battery installation.
Waterproof: IPX-8 Standard (2M).
Impact resistance: 1.5M.
Dimension: 201mm(length)*79mm(bezel diameter).
Weight: 653g (without batteries).
Accessories (included): 1 x Holster, 1 x Lanyard, 1 x O-ring, 1 x User Manual.
Click the tail switch to turn on/off.
Tactical Lighting/Momentary On
Half press the tail cap button, the flashlight will turn on temporarily; release the button at the tail cap, the light will turn off.
When the light turned on, rotating the Control Ring to cycle through six brightness levels, stand-by and strobe mode smoothly.
Use of Battery
Battery: uses 3 *18650 batteries.
Battery Replacement: to ensure performance of the flashlight and for your own safety, please use high-quality batteries with an integrated protected circuit and make sure to insert the batteries correctly with the negative (-) polarities connecting the springs in the battery carrier.
Please take out the batteries if you will not use your light for an extended period of time to avoid battery leakage, which may damage the flashlight components and parts.
Use of O-rings (if available)
A right amount of lubricant will be used on the O-rings before shipping to ensure the light can be assembled smoothly and protect from oxidizing the O-rings.
If necessary, please replace the spare O-ring attached in the package.
Please mind the heat. When the light runs a long time, there is heat coming from the battery discharge, drive circuit and LED. The flashlight head will be very hot.
DO NOT use the light at Max mode for a long time. To protect the battery, drive circuit and LED, we do not recommend you run the light at Max mode more than ten minutes.
2 Year Warranty(excludes rechargeable battery): Free repair for any product or part which is found to be defective under normal use and service. Warranty does not apply for accessories.
Limited Lifetime Warranty: After exceeding 2 years, repair service will still be provided. However, customer is to bear the cost of parts and shipping.
Radiant Den Store
Block H-1-20(1st Floor), Jalan PJU 1A/3, Taipan 2, Ara Damansara, 47301 Petaling Jaya, Selangor
GPS: 3.118172, 101.578730
(Same row as Michelin Tyre Shop, Above Titanium Force, Beside MHS Aviation Berhad/Pun Chun Noodle House)
Tel: +6011 2771 3818