WORKS ENGINEERING ADJUSTABLE CAM GEAR
Mitsubishi Lancer Evolution 4G63 1-8
VR-4 Mirage 4G61 4G67
Each gear is adjustable in 1 increments to a maximum +/- 10.
Our engraved timing marks are accurate to within 1 minute of degree!
With the simple design our gears end up being lighter than the stock gears they replace.
Our tooth profile matches the OEM spec exactly for each gear we make.
The outer cog section of our gears is black hard-anodized, to prevent on/wear from the timing belt.
We use black hard coat because of the great contrast it gives against our engraved timing marks.
The 5-bolt locking pattern is plenty secure and we use only stainless steel hardware to ensure durability.
This design provides a lifetime of worry-free adjustment.
Machining for optimum component fit is critical with adjustable cam gears.
Any free play between the inner and the outer sections will cause the hardware to come loose no matter how much is tightened.
Our extra care in the machining process guarantees you our gears will not come loose when you follow the torque specifications in our instructions.
Horsepower gains can vary widely depending on what has been done to the vehicle and how it is used.
Gain from 5 to 20 horsepower can be realized.
Harga : RM 499 Sepasang
Lokasi : C.O.D Bangsar / Ampang / Sentul atau pos ke seluruh Malaysia dan
jika rumah, bengkel, atau pejabat anda di area berdekatan, saya
akan hantar terus ke tangan anda.
Contact : 012 4408670 call / sms / whatapps semua layan kita bincang
sampai puas hati. Setiap sms / whatapps / panggilan anda akan di layan sebaik mungkin