Sparco 4 Point Street Harness.

3 fixing points, snap on
Double buckle snap on
Lap reinforcement

Available in Red, Blue or Black.

N1 Racing Team

Sparco 4 Point Street Harness

Koyorad Koyo - Honda Integra DC5 Type R  Aluminium Radiator (V SERIES 36mm Core) PN - V2425

Length - 28.5 inch

Height - 18.5 inch

Thickness - 36 mm

Inlet / Outlet hose - 32 mm

Designed for applications where engine configuration/size cause clearances issues for thicker core radiators.  In this case, the 36mm V-Core Series will suit your needs.   Intended for both circuit and daily use.  Unless noted otherwise, all Koyorad V-Series All Aluminum Radiators are Nocolok brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the  stock fan shrouds and fans.

Koyo Koyorad Aluminium Radiator Honda Integra DC5

Pivot Japan Speed Meter V (SML-V) Limiter Cut suitable for most japanese vehicles to remove the 180km/h limiter.

Features:

- Speed Meter
Maximum 350 km/h; Highly Accurate Display in Units of 1 km/h.

- Speed Limiter Remover Function
Remove 180 km/h (140 km/h for Light Cars) Speed Limiter.

- Auto Measurement for 0-400 Meters
- Auto Measurement of Acceleration Time for Set Distance. (Distance Setting Choices: 100, 200, 300, 400m)

- G METER
Accurate 0.01 unit display of acceleration during both forward progression and braking helps you understand changes in torque and brake performance.

- Skeleton Black Case
The Display shines through the skeleton black case.

- Compatible with wide range of car models

Pivot Speed meter V (SML-V) 180kmh Speed Limit Cut

K&N Typhoon Air Intake Kit for Toyota FT86 and Subaru BRZ / FA20

This is a plug and play kit and no modifications required.

Guaranteed to increase horsepower
Designed to improve throttle response and engine sound
Low restriction aluminum tube
Easy to install, usually in 90 minutes or less

K&N Typhoon Air Intake / Filter / Toyota 86 / BRZ

MAX Racing Front Wide Fender (+20mm) for Honda Civic FD2 Type R.

MAX Racing Wide Fender (+20mm) Honda Civic FD2 R

PracWorks Carbon K20C1 Intake Manifold for Honda Civic Type R (FK2 / FK8 / FL5).
Full Plug & Play Intake Manifold Design. Just install and feel the almost 10% Increase in Power from 3500 rpm onwards without tuning on a Stock Honda Civic.

• Designed for Mid to High Rpm Power Gains. Ideal for Street/Track Application
• Dyno tested to make 25-30hp more midrange & 10-15hp more at peak power on just a Stock Car
• Features Long Runners to harness Resonance Tuning which is Lacking on Stock Honda Intake Manifold
• 2.665L Plenum Volume
• Safe for Boost Up to 70psi
• Retains Stock Honda K20C1 Throttle Body Bolt Pattern & Throttle Body Location
• Compatible with +2mm Oversized Throttle Body. Throttle Flange Inlet Size = 66mm
• Direct Plug and Play. Installation Time Approximately 4 hours
• Fits Left and Right-Hand Drive Cars
• Prepreg Carbon Fiber Construction with Billet 6061-T6 Flanges
• Minimize Heat Soak as Carbon Fiber is 40 times Less Thermally Conductive than Aluminum
• Comes with Vacuum Fittings similar in size as Stock Honda Manifold
• Intake Manifold Weight: 3kg

PracWorks Carbon Intake Manifold Honda FK2 FK8 FL5

J'S Racing 304 cat delete stainless steel exhaust system for Honda Integra DC5 Type R.

JS J'S 70RR Exhaust System - Honda Integra DC5 R

Eibach Pro Kit High Performance Lowered Springs for Honda Civic FK8 / FL5 Type R.

Progressive spring rate for comfortable ride
Very mild 0.6/0.7 inch drop
Works with all 3 driving modes
Improves performance by lowering center of gravity
Designed for the OEM shocks.

Eibach Pro Kit Spring - Honda Civic FK8 / FL5 R

Link: https://www.hks-power.co.jp/en/product_db/cooling/db/33736

HKS R TYPE INTERCOOLER & PIPING KIT for Honda Civic FL5 Type R

PN: 13001-H007

Features
Intercooler Core
A huge 22.4% increase in core’s area leads to immense improvement in cooling.
The OEM core does not provide sufficient cooling capacity when boosting up, with increased core capacity it will be compatible with everything from boosting up to turbo upgrade.
The core is designed to be also installed with OEM piping

Piping Kit
Upon enlarging the pipe diameter and smoothing out the inner design in comparison to OEM we are able to increase power output.
The OEM hose is prone to expand under high boost, but aluminum pipe has completely solved the issue of pressure loss due to hose expansion.
The aluminum pipe is given a mirror buff finish, and the cast pipe and core feature the HKS logo, which gives a fantastic dress-up look.

HKS R Type Intercooler + Piping Honda Civic FL5 R

ACL Orbit high pressure racing oil pump suitable for Honda VTEC B16A / B16B / B18C / B20B

PN: OPHD1194HP

ACL performance oil pumps are designed with high output and volume capabilities required for high RPM performance engines (see flow data chart). The gerotors are precision machined from steel-copper alloy (FC0205), an exceptionally durable metal that assures dependability and durability. Tight housing and gerotor tolerances provide optimum pressure and flow requirements. Housings are die cast DC-12 aluminum and are anodized to prevent corrosion. All pumps are individually inspected and tested.

ACL Oil Pump - Honda VTEC B16A / B16B / B18C / B20

SPARCO PRO 2000 - QRT Bucket Seat / FLUOROCENT.

NOT FIA approved

Good for normal, track day or SIM usage

Available in:
Black / Fluoro Orange
Black / Fluoro Yellow

SPARCO PRO 2000 - QRT Bucket Seat / FLUOROCENT

MADE IN JAPAN

EDFC Compatible

TEIN Flex A - Adjustable suspension suitable for 

Toyota MARK X - GRX120 / GRX121 / GRX130 / GRX133

LEXUS ISF - USE20 / USE20L

LEXUS IS250 - GSE20 / GSE20L / GSE20R

LEXUS IS350 - GSE21 / GSE21L

https://www.tein.co.jp/e/products/flex_a.html

PN: VSQ22-D1SS3

Spring Rate:
Front - 8kg
Rear - 8kg

Mount:
Front - TEIN Rubber Upper mount
Rear - TEIN Rubber Upper mount

1.	New Hydraulic Bump Stopper (H.B.S.) for Comfortable Ride in ALL Seats!	
2.	Twin-Tube System for Comfortable Ride on Streets!	
3.	Full-Length System for Ride Height Adjustment w/ Minimal Change in Ride!
4.	Damping Force Adjustable to Change Ride to Desired Settings!	
5.	Compatible with EDFC Series to enable In-Car Damping Force Adjustment!	
6.	Upper Mounts Included for Easy Installation!	
7.	Highly Durable & Reliable!	
8.	Thoroughgoing Rust-Proofing!	
9.	Highly-Rigid Bracket & Shell Case!	
10.	Smooth Ride Height Adjustment & One-of-A-Kind Adjusting Wrench!	
11.	No-Sag Springs!	
12.	High-Spec Damper Oil!

Tein Flex A - Toyota Mark X / GRX130 / Lexus IS250

Goodridge Performance Brake Hoses suitable application for Toyota FT86, GR86 and Subaru BRZ / FA20 or FA24 model.

Goodridge G-Stop Brake Line Kits are constructed from the finest quality hose, consisting of a PTFE inner and stainless steel overbraid. Replacing OE brake lines with -03 PTFE hose improves brake feel over factory lines, eliminates sponginess, and provides shorter stopping distances and consistent braking in performance applications. 

The shorter stopping distances and improved pedal response provide safety features as well as performance advantages. All G-Stop lines go through a nine-point quality assurance testing including the materials tensile strength and 3000 psi pressure ratings. When used with an ABS braking system they virtually eliminate brake pedal “chatter”. 

All G-Stops conform to FMVSS106-Federal Motor Vehicle Safety Standard- making them DOT compliant and are TUV approved-the German standard that most international regulations follow.

*Features*
 * Performance Enhancement & Safety Improvement
 * Eliminates Sponginess Under Braking
 * Increases Braking Efficiency
 * Abrasion and Corrosion Resistant

Goodridge Brake Hose - FT86 / GR86 / BRZ / FA20 24

Entire Malaysia

Johor

Kedah

Kelantan

Kuala Lumpur

Labuan

Melaka

Negeri Sembilan

Pahang

Penang

Perak

Perlis

Putrajaya

Selangor

Sabah

Sarawak

Terengganu

All Perlis

Arau

Kaki Bukit

Kangar

Kuala Perlis

Padang Besar

Pauh

Seriab

Simpang Ampat

Titi Tinggi

Utan Aji

Others

All Kedah

Alor Setar

Alor Merah

Anak Bukit

Ayer Hitam

Baling

Bandar Baharu

Bukit Kayu Hitam

Changlun

Guar Chempedak

Gurun

Jitra

Karangan

Kepala Batas

Kodiang

Kota Sarang Semut

Kota Setar

Kuah

Kuala Kedah

Kuala Ketil

Kuala Muda

Kuala Nerang

Kubang Pasu

Kulim

Kupang

Lunas

Merbok

Naga Lilit

Padang Serai

Padang Matsirat

Padang Meha

Padang Terap

Pendang

Pokok Sena

Pinang Tunggal

Langkawi

Semeling

Serdang

Simpang Empat

Sungai Lalang

Sungai Pasir

Sungai Petani

Tawar

Tikam Batu

Teloi Kiri

Temin

Ulu Melaka

University Utara

Bedong

Langgar

All Penang

Air Tawar

Alma

Ayer Itam

Bagan Ajam

Bagan Jermal

Bagan Lalang

Balik Pulau

Bandar Perda

Batu Ferringhi

Batu Kawan

Batu Maung

Batu Uban

Bayan Baru

Bayan Lepas

Berapit

Bertam

Bukit Dumbar

Bukit Jambul

Bukit Mertajam

Bukit Minyak

Bukit Tambun

Bukit Tengah

Butterworth

Gelugor

Georgetown

Gertak Sangul

Greenlane

Jawi

Jelutong

Juru

Kubang Semang

Mak Mandin

Minden Heights

Nibong Tebal

Pauh Jaya

Paya Terubong

Penaga

Penang Hill

Penanti

Perai

Permatang Kuching

Permatang Pauh

Permatang Tinggi

Persiaran Gurney

Prai

Pulau Betong

Pulau Tikus

Raja Uda

Relau

Scotland

Seberang Jaya

Seberang Perai

Sungai Ara

Sungai Bakap

Sungai Dua

Sungai Jawi

Sungai Nibong

Sungai Pinang

Tanjong Tokong

Tanjung Bungah

Tasek Gelugor

Teluk Bahang

Teluk Kumbar

Valdor

All Kelantan

Ayer Lanas

Bachok

Badang

Baung

Cherang Ruku

Dabong

Gua Musang

Jeli

Kem Desa Pahlawan

Kemumin

Ketereh

Kok Lanas

Kota Bharu

Kuala Balah

Kuala Krai

Kubang Kerian

Machang

Melor

Padang Enggang

Pasir Mas

Pasir Puteh

Pendek

Pengkalan Chepa

Peringat

Pulai Chondong

Rantau Panjang

Selising

Tanah Merah

Tawang

N1 Racing Team

About N1 Racing Team

Branch