The HKPilot Mega 2.5 is a complete open source autopilot system featuring the best selling technology. This version is ready to use, with no assembly required. It allows the user to turn any fixed wing, rotary wing or multi-rotor vehicle (even boats and car) into a fully autonomous vehicle capable of performing programmed GPS missions with waypoints (GPS module required - sold separately). 

Features:
 Arduino Compatible
 pre-soldered and tested
 3-axis gyro, accelerometer, magnetometer and high-performance barometer
 Built in 4 MP Dataflash chip for automatic data logging
 Honeywell HMC5883L-TR Digital compass 
 Invensense's 6 DoF Accelerometer/Gyro MPU-6000
 Measurement Specialties MS5611-01BA03 Barometric pressure sensor.
 Atmel ATMEGA2560 and ATMEGA32U-2 (processing and USB function).
 Micro-USB 

*Note: GPS module is not included. Sold separately.

Specs:
Dimensions: 67x40x10mm
Weight: 17g

Includes:
HKPilot Mega 2.5
3pin 2.54mm pitch connection leads x 5

This product is based on the APM Project from 3D Robotics.
***
Other Terms & Conditions: 
Electronic item was purchase online for re-sell, therefore, return for replacement or refund shall not be accepted
***
 Payment option:
- Cash On Delivery 
- Online Payment/Postage: 
Maybank / Poslaju or Pos Express

Ebusy

HKPilot Mega V2.5 Flight Controller USB/GYRO/ACC/M

Supports:
Realflight G7/G7.7
Phoenix 5
XTR
LIFTOFF
Freerider

All in one simulator golden new version

The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with Deans connectors, and wrapped in shrink tubing for protection.

Note: The Power Module is only designed to power APM, a RC receiver and APM accessories (GPS, 3DR radio). It is not designed to power servos. Use your aircraft's own ESC/BEC for that.

Specifications:

Max input voltage: 50V
Max current sensing: 90A
Voltage and current measurement configured for 5V ADC
Switching regulator outputs 5.3V and 2.25A max
6-pos DF13 cable plugs directly to APM 2.5's 'PM' connector
Usage: For APM 2.6 , 2.5 , 2.52 , 2.8 , V3.1 Flight Controller.

Package included:
1 x Power Module With 5.3V DC BEC

APM 2.6 2.5 2.52 Power Module With 5.3V DC BEC

AMASS XT30U connectors
Size smaller than xt60.
Amass original, good quality.

Price is for 1 pair.

XT30 connector 1 pair Amass brand

Twisted 26AWG servo wire.
Anti interfrence.

Twisted 26AWG servo wire 1 Meter

Flat 22AWG servi wire 1 meter

Frsky RX6R receiver
Dimension: 21x17x7mm
Weight: 2.9g
Working voltage: DC3.5 - 10V
Working Amp: 100mA@5v
Distance: >2km
Channel: 16(1-6 PWM Output
1-16(SBUS Output)
Mode: D16
Speed: 9ms(HS-High speed mode) /18ms(FS-Normal working mode)

Frsky RX6R 6-16 channel receiver

10CM or 15CM Male to Male Servo Lead (JR) 26AWG

Ideal for connecting your reciever to the HobbyKing Quadcopter Control board, or any flight control board.

Price is for one piece only.

Male to Male Servo Lead 26AWG (per piece

Compatible with Futaba FASST transmitters: TM7, TM8, TM10, TM14, T8SG + more.
The OrangeRx 8ch is only 9.7g in weight and 33x55x14.5mm in size. Great for small planes, heli's, parkflyers or even medium sized sport planes.
Key features.
Light weight 9.7g
Compatible with FASST aircraft radio and module systems
8 Channels
Compact design 33x55x14.5mm
Twin antenna for diversity and long range.
Input voltage: 4~9.8V
Specified Range: 1.5km+
Resolution: 3072
Latency: 22ms
Failsafe
Included.
OrangeRx Futaba FASST 2.4Ghz Compatible 8Ch receiver

NOTE* This is not a Futaba receiver, nor is it a copy of a Futaba receiver.
Futaba and FASST are trademarks of Futaba Co (JP).
Note* Disable failsafe on transmitter, otherwise you will experience servo jitter

OrangeRx Futaba FASST Compatible 8Ch 2.4Ghz Receiv

OrangeRx have created another excellent receiver after listening to customer feedback. This lightweight 3.9g comes in a soft case to keep the weight down and can be used in multirotor or other applications where there is no need for a hard case to protect the receiver.
Compatible with all DSM2 2.4GHz Air transmitters and now featuring CPPM!
The OrangeRx R610V2 lite takes things to the next level by offering CPPM, true DSM2 compatibility and utilizes dual antennae providing true signal reception diversity! Add to this programmable failsafe on binding, ultra fast brown-out recovery and wide voltage input range. The end result being an unbeatable value for the money multirotor/aircraft receiver!
The all new CPPM functionality is an excellent feature for use with multi-rotor flight controllers such as the KK2.1, APM, MultiWii and others. This single line connection removes the weight and mess of additional wire leads for each individual channel. This is ideal for use on small frames where space is at a premium.
OrangeRx receivers are built using original components, MCUs and with state of the art SMT automation to ensure a quality product each and every time. Every R610V2 is manufactured using impedance matched PCBs with exact tuning to provide signal stability and range that exceeds any of the previous generation ORX products. In fact, our testing has shown that the R610V2 exceeds the range of other receivers in the same class.
All R610V2 Lite OrangeRx receivers are QC tested using our latest method that ensures range checking takes place as the receiver is programmed. Simply put, if the R610V2 Lite cannot pass the range check it cannot be programmed, this ensures 100% of R610V2 Lite are guaranteed to work flawlessly.
The R610V2 heralds a new era of quality, reliability and performance for the OrangeRX line up.
Features:
 Super lightweight 3.9g (with shrink tube)
 Compatible with DSM2 compatibility
 CPPM output allowing for single line connection with compatible CPPM devices
 Short 25mm antennae for mounting in almost any location
 Wide input voltage: 3.7~9.6V
 6 Channels
 Compact design
Specs:
Channels: 6
Input voltage: 3.7~9.6V
Size: 41x18x10mm
Weight: 3.9g

OrangeRx R610V2 Lite DSM2 Compat

Compatible with all DSM2/DSMX 2.4GHz Air transmitters and now featuring CPPM!
The OrangeRx R615X takes things to the next level by offering CPPM, true DSMX compatibility and utilizes dual antennae providing true signal reception diversity! Add to this programmable failsafe on binding, ultra fast brown-out recovery and wide voltage input range. The end result being an unbeatable value for the money aircraft receiver!

The all new CPPM functionality is an excellent feature for use with multi-rotor flight controllers such as the KK2.1, APM, MultiWii and others. This single line connection removes the weight and mess of additional wire leads for each individual channel. This is ideal for use on small frames where space is at a premium. 
OrangeRx receivers are built using original components, MCUs and with state of the art SMT automation to ensure a quality product each and every time. Every R615X is manufactured using impedance matched PCBs with exact tuning to provide signal stability and range that exceeds any of the previous generation ORX products. In fact our testing has shown that the R615X exceeds the range of other receivers in the same class. 
All R615X OrangeRx receivers are QC tested using our latest method that ensures range checking takes place as the receiver is programmed. Simply put, if the R615X cannot pass the range check it cannot be programmed, this ensures 100% of R615X are guaranteed to work flawlessly.
The R615X ushers in a new era of quality, reliability and performance for the OrangeRX line up.
Features:
 Super light weight 3.7g / 9.8 grams with case
 Compatible with DSM2/DSMX 1024/2048 aircraft radio and module systems
 CPPM output allowing for single line connection with compatible CPPM devices
 Short 25mm antennae for mounting in almost any location
 Wide input voltage: 3.7~9.6V
 6 Channels
 Compact design

Specification:
Channels: 6
Input voltage: 3.7~9.6V
Size: 19.5x30x10mm, 43x22x13mm with case
Weight: 3.7g / 9.8g with case 

Included:
OrangeRx R615X DSM2/DSMX 2.4GHz compatible receiver
Bind plug

*Note:
1) This is not a Spektrum DSM2/X product, nor is it a copy of a Spektrum DSM2/X product. 
The Spektrum and DSM2/X brand is a trademark of Horizon Hobbies USA.
2) This is not an underground black market fake Spektrum product. OrangeRx quality is guaranteed.

OrangeRx R615X DSM2/DSMX Compati

The OrangeRx 6ch compact receiver has been designed for FPV racing drones with carbon frames. The extra length antenna allows you to route them outside of the frame for extended range and a robust link to your transmitter.

OrangeRx receivers are built using original components, 32 bit MCUs and with state of the art SMT automation to ensure a quality product each and every time. Every single receiver is manufactured using impedance controlled PCBs with exact tuning to provide signal stability and range that exceeds any of the previous generation ORX products. In fact, our testing has shown that the R617XL exceeds the range of other receivers in the same class.

All R617XL OrangeRx satellite module receivers are QC tested using our latest method that ensures range checking takes place as the receiver is programmed. Simply put, if the R617XL cannot pass the range check it cannot be programmed, this ensures 100% of R617XL's are guaranteed to work flawlessly. The R617XL ushers in a new era of quality, reliability and performance for the OrangeRx line up.

The receiver features "True Diversity" technology, this is especially important for long range flights and in situations where you need that more robust reception. This receiver is very useful where carbon is used in the construction of your model where the antenna can be in the shadow of the airframe. If one of the antenna's cannot receive a signal due to its orientation then the satellite will use the other one to receive the commands from the transmitter.

The R617XL is a satellite module receiver and has a 6 channel cPPM output allowing for a single line connection with compatible devices. This satellite module has been tested with and is fully compatible with the following Flight Controllers;
 Naze32
 CC3D
 KK2
 MultiWii
 APM (2.0 and upwards)
 V-Bar 5.3

Features:
 Ultra compact and lightweight (only 3.5g)
 6 channel cPPM
 Ultra fast brownout recovery
 Programmed fail safe
 Wide input voltage (3.7~9.6V)
 Compatible with numerous flight controllers

Specs:
Frequency: 2.4Ghz
Modulation: GFSK
Sensitivity: Up to -97dBm
Compatibility: Compatible with DSM2/DSMX 1024/2048 aircraft radio and module systems
Channels: 6 channel cPPM output single line connection
Input Voltage: 3.7~9.6V
Current Consumption: 35mA
Dimensions: 19 x 27 x 10mm
Weight: 3.5g
Antenna Length: 210mm

OrangeRx R617XL cPPM DSM2/DSMX Compatible 6ch Rece

The Hobbyking 3-Channel Video Switcher is a great
accessory for any FPV model. It allows you to
easily switch between up to 3 cameras by using a
switch on your transmitter. It features one
receiver input, 3 camera inputs and one video
output.

Features:
 Compact and lightweight design
 Switch between 3 cameras from your transmitter
 Simple to use
 Perfect for FPV models

Specs:
Dimensions:30x18x6mm
Weight:4g

Ebusy

About Ebusy