Forge Motorsport Intercooler for Toyota GR Yaris

Forge Motorsport Intercooler for Toyota GR Yaris

Ready stock in showroom now.

FMINT25 is a performance intercooler for the Toyota Yaris GR, produced, designed, and tested at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the Yaris GR’s engine. Our project brief was to develop an intercooler utilising all of the available space available in the original position of the OEM intercooler, and to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling.

Using a combination of scanning software and traditional measuring methods, the design was created. This was then fine tuned by our computational fluid dynamics (CFD) team, and the end tanks were initially created by 3D printers. We then alloy cast our first prototypes from our 3D prints using a sand casting technique and started the testing procedure on several types of intercooler cores.

The first iteration fitted the vehicle perfectly, however, our technicians and engineers felt the inlet and outlet should be enlarged along with providing the end user with the necessary boost pipes to ensure flow was maximized on the Toyota`s GR 3 cylinder engine.

Before getting to work on the dyno, we spec'd three different type of cores; one of these being bar and plate and two being a tube and fin construction - with all three cores having different internal and external fin pitches and configurations. We then welded the test parts ready for testing along with fabricating an internal baffle to the inlet (hot side) of the end tank. This is to ensure, from our CFD research, that the total volume of the core internal is utilised for optimum performance.

Compared to the OEM intercooler, the improved Forge product has a surface area increase of over 42% and an internal volume increase of over 100% as well as Gains of more than 10bhp and 10 lbs/ft. These gains can be even higher depending on your vehicles state of tune and complementing performance products like the turbo inlet adaptor and the inlet duct. As the hot and cold side, inlet and outlet, have been increased to 60mm, we have included within the intercooler kit all the necessary silicone hoses and hardware to complete the installation and connect to the OEM parts.

For Online purchaser purpose please refer part number below -
Part number : FMINT25

For further inquiries or other car models please E-mail :
- ****@***.***

Proper installation and paint job can be arrange by appointment .

For any enquiries please do not hesitate to contact us for more details,

Contact number : +60 19-263 8535

Dealer are welcome.

Our address :

Racecraft MSD Sdn Bhd

No. 32, Jalan USJ 1/33, Taman Subang Permai,
47600 Subang Jaya, Selangor.

@ Motorsport Division @ RC Motorsport

For view customer feedback or car gallery photo that we done before please search and like our FB account under name Motorsport Division.

Follow our Instagram : Motorsportdivision

Check our Mudah store quick link for more items :

http://www.mudah.my/rc-motorsport

We managed to ship world wide.

For more details Please Call/ Whatsapp : +60 19-263 8535

( Business time Monday - Saturday : 9AM - 5PM , CLOSED ON SUNDAY )

Payment option :
-Online Transfer for Postage or Pre-order

Payment Method :
-CIMB bank @ Cash Deposit
-Maybank2U @ Cash Deposit

Courier Service by :
-Skynet Express
-GDex Express
-Bright Star Logistics ( East Malaysia )
-Sirius Express ( East Malaysia )
-ATR Logistics ( East Malaysia )
-SF Express ( World Wide )
-DHL Express ( World Wide )

Thanks.