WURTH Air Intake and Throttle Valve Cleaner

The Würth Air Intake and Throttle Valve Cleaner is a highly active, specialized solvent formulated to remove carbon, resin, oil films, and sludge in the intake and throttle areas without needing component disassembly.

Key Physical & Chemical Properties
● Appearance: Colorless
● Odor: Solvent-like
● Chemical Basis: Hydrocarbons (Primarily Acetone, Isopropyl alcohol, and Hydrocarbons C6-C7)
● Density: 0.86 g/cm³ at 20°C
● Shelf Life: 24 months from production

Application & Compatibility
● Engine Type: Suitable for both 2-stroke and 4-stroke petrol engines (with or without catalytic converters).
● Not Suitable For: Not intended for diesel injection nozzles unless removed.
● Benefits: Rectifies rough engine idle, improves throttle response, and restores optimum fuel-to-air mixture.

Standard Usage Instructions
1. Turn off the engine and allow it to cool slightly.
2. Spray the cleaner generously onto all parts to be cleaned.
3. Allow the active agent to chemically react and break down deposits for 2 to 3 minutes.
4. Start the engine and spray briefly into the intake duct (increasing engine speed slightly) to burn off the dissolved dirt.