Wurth Brake Fluid DOT 4 for Hydraulic Brake System

Specifications:

Brake Fluid Type: DOT 4 (glycol ether-based)

Dry Boiling Point: ≥ 260°C (typical premium version)

Wet Boiling Point: ≥ 155°C

Standards: FMVSS 116 DOT 4, DOT 3, SAE J1703, SAE J1704, ISO 4925

Chemical Base: Glycol ether

Color: Yellow/Amber

pH: 7–11

Density: (20°C)~1.04 g/cm³

Flash Point: ≥120°C

Compatibility: Mixable with DOT 3 and DOT 4 glycol-based fluids

Not Compatible With: DOT 5 (silicone) or mineral oil brake fluids


Features

Suitable for hydraulic brake and clutch systems.

Compatible with ABS and ESP systems.

High corrosion protection for steel and non-ferrous metals.

Good rubber seal compatibility.

Hygroscopic (absorbs moisture), so replacement at the vehicle manufacturer's recommended interval is important.


Notes

Würth also offers DOT 4 LV (Low Viscosity) and DOT 5.1 fluids for vehicles requiring faster ABS/ESP hydraulic response. Use the specification recommended in your owner's manual.