Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

Increase engine airflow and horsepower while adding a touch of color and style to your engine bay with the PERRIN Inlet Hose for Toyota FT86 / Subaru BRZ.

The Perrin Inlet hose has a 3.0" internal diameter compared to 2.7" found in the OEM port. This allows for a greater amount of air to smoothly enter your engine with virtually no restriction. The larger diameter will easily support bolt on modification especially after market cams.

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

N1 Racing Team

Perrin Inlet Hose - Toyota FT86 GT86 Subaru BRZ

Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

Goodridge Performance Brake Hose suitable application for Honda Civic FK8 Type R.

Goodridge G-Stop Brake Line Kits are constructed from the finest quality hose, consisting of a PTFE inner and stainless steel overbraid. Replacing OE brake lines with -03 PTFE hose improves brake feel over factory lines, eliminates sponginess, and provides shorter stopping distances and consistent braking in performance applications. 

The shorter stopping distances and improved pedal response provide safety features as well as performance advantages. All G-Stop lines go through a nine-point quality assurance testing including the materials tensile strength and 3000 psi pressure ratings. When used with an ABS braking system they virtually eliminate brake pedal “chatter”. 

All G-Stops conform to FMVSS106-Federal Motor Vehicle Safety Standard- making them DOT compliant and are TUV approved-the German standard that most international regulations follow.

*Features*
 * Performance Enhancement & Safety Improvement
 * Eliminates Sponginess Under Braking
 * Increases Braking Efficiency
 * Abrasion and Corrosion Resistant

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

Goodridge Performance Brake Hose Honda Civic FK8 R

Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

TURBOSMART Kompact Shortie Dual Port Blow Off Valve Kit suitable for Mercedes AMG A45, CLA45 and GLA45.

Despite the AMG four's high boost levels, these vehicles do not have a bypass valve fitted from the factory. This is likely because the plastic valves typically found in OEM setups would not be capable of handling the A45's 26PSI of boost without failing prematurely. As a result, the AMG 45 models suffer from a significant amount of compressor surge. Compressor surge, combined with the A45's high boost pressures, equals a recipe for disaster for the bearings inside the turbocharger.

Enter Turbosmart's Kompact Shortie Blow-Off Valve for the A45, CLA45 and GLA45 AMG. This high performance billet aluminium valve bolts straight onto the the compressor cover of the AMG's turbocharger. With both Dual Port and Plumb Back variants available, owners can choose between the classic blow-off valve sound afforded by the Dual Port's 50-50 split between recirculating and vent-to-atmosphere operation, or the quieter and OEM-like operation of the Plumb Back. Both variants dramatically reduce the compressor surge experienced by the A45 in standard form.

The Shortie's billet construction and high performance piston design, which eliminates the need for an O-ring to seal the body of the blow-off valve against the piston due to extremely fine machining tolerances, means the valve has no problem coping with the boost pressures produced by the AMG's turbo, ensuring no leaks and extreme durability - even if you decide to turn the boost up.

The VR03 Kompact Shortie Kit for the Merceded Benz A45, CLA45 and GLA45 AMG includes a Boost Reference Adapter that allows the blow-off valve to respond to engine vacuum instantly, providing a greater level of control compared to electronically operated valves. This is possible by allowing the valve to access a manifold pressure reference in the AMG's otherwise closed system - all without any destructive methods, such as tapping into the intake manifold. The Boost Reference Adapter offers two pressure ports, allowing you to run a second manifold pressure operated accessory, such as a boost gauge.

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

TURBOSMART Dual Port BOV  - MERC A45 CLA45 GLA45

Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

SUITABLE FOR :

Most Turbo Petrol Mercedes Benz and AMG 1.6L /1.8L & 2.0L engines in A / B / C / CLA / E / GLA / GLC / SLC / SLK Class vehicles from around 2007 onwards.

Some Ford Ecoboost 1.5L / 1.6L / 2.3L and 2.7L engines in Mustang / Focus / Mondeo / Fusion / Galaxy / C-Max / Kuga / Tourneo.

Some Infiniti using the Mercedes 1.6L and 2.0L M270DE engines.

The award-winning Kompact EM series Blow-Off Valves, are the world’s first truly plug and play Blow-Off Valves. Simply unplug and unbolt your OEM Blow-Off Valve, and install ours in its place. No adapters, hoses or extra assembly required. All this while retaining complete OE control of the BOV’s operation.

Turbocharger performance is increased due to minimising leakage, rapid response, coupled with superior thermal performance thanks to our world-leading engineering and simulation abilities.

A must-have for hybrid or larger flowing turbos that utilise OE electronic diverter valve by not leaking, the EM will achieve target boost without stressing the turbo charger and wastegate

Dual Port vents both to the atmosphere and back into the air intake. 

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

Turbosmart BOV Mercedes Benz 1.6, 1.8, 2.0 / FORD

Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

Tomei Expreme Ti Titanium cat back exhaust set for Mitsubishi Lancer Evolution 7, 8 and 9.

A high-quality, high-performance muffler that was created just to run fast, eliminating all waste and compromise.
Originally developed from materials to realize its quality and performance. In terms of functionality, Tomei paid particular attention to everything, including the infinitely straight layout and the internal structure of the silencer.
Tomei have accumulated a great deal of attention to detail in each and every one of them, and it is the EXPREME Ti series that sets it apart from other mufflers.

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

Tomei Expreme Titanium Exhaust Lancer Evo 7, 8, 9

Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

K-Tuned Pro Series Traction Bar for Honda Civic EF or CRX. (B series or K-Swap).

Kindly take note that there might be some slight modifications for installation due to the model designed was for HONDA USA / CANADA models and they might differ to JAPAN models.

These bars are the strongest ETD makes and the best in the industry. We use only the best high-grade steel and chromoly in the construction and the strongest hardware money can buy. These bars are designed for high hp street and track dedicated cars.

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

K-Tuned Honda Civic EF CRX Pro Series Traction Bar

Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

Blox Racing Oil Pan Baffle Plate / Oil Sump for Honda Integra DC5 Type R.

BLOX Racing's Oil Pan Baffle is designed to prevent oil from sloshing inside the pan. The unique design creates three chambers within the pan, with the largest chamber surrounding the oil pump pick-up. This ensures that there is enough oil volume present to prevent oil starvation during hard driving, cornering and other racing conditions. With continuous oil pick-up, critical engine lubrication is maintained and oil starvation prevented.

The BLOX Racing Oil Pan Baffle is manufactured using 16-gauge, AL6061-T6 and features stainless steel rivets. The baffle is bolt-in and is very easy to install.

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

Blox Racing Oil Pan Baffle Plate Honda DC5 R

Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

BLOX is pleased to introduce its updated TPS (throttle position sensor) design for the Honda K-series powerplant. The new TPS unit features a billet aluminum casing that fits over the TPS and protects it from any engine grime and debris.  The billet casing also provides an additional layer of assurance from engine vibrations. The billet casing features the BLOX logo and part number to guarantee its authenticity.

Improved TPS design
CNC-machined, billet aluminum casing
Incorporated fitment
Direct bolt-on

Applications:
2002-2006 Honda Integra DC5 Type R
2002-2005 Honda Civic EP3 Type R

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

Blox Racing TPS Version 2 for Honda DC5 and EP3 R

Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

Endless Swivel Steel Brake Hose for Subaru Impreza STI (GRB, GVB, GRF, GVF).

The swivel / steel type is a new type of brake line that combines high quality and high functionality. It is made of highly durable steel and stainless steel, so it is extremely reliable. The socket on the vehicle body side is rotated by the swivel mechanism, making it easy to handle when installing. In addition, since the degree of freedom in handling is maintained, it is also a countermeasure against breakage of the brake line due to insufficient line length adjustment. A "sleeve" made of reinforced rubber is provided at the boundary between the socket and the line to prevent the line from breaking from the base of the socket, which is also a weak point of the brake line.

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

Endless Swivel Steel Brake Hose - Subaru GRB GRF

Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

Endless Swivel Steel Brake Hose for Mitsubishi Lancer Evolution X (CZ4A).

The swivel / steel type is a new type of brake line that combines high quality and high functionality. It is made of highly durable steel and stainless steel, so it is extremely reliable. The socket on the vehicle body side is rotated by the swivel mechanism, making it easy to handle when installing. In addition, since the degree of freedom in handling is maintained, it is also a countermeasure against breakage of the brake line due to insufficient line length adjustment. A "sleeve" made of reinforced rubber is provided at the boundary between the socket and the line to prevent the line from breaking from the base of the socket, which is also a weak point of the brake line.

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

Endless Swivel Steel Brake Hose - Mit Lancer Evo X

Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

HKS Super SQV IV Blow Off suitable for all models Mitsubishi Lancer Evolution 7, 8 and 9 (4G63 Turbo) 

Direct plug and play unit.

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

HKS Super SQV IV Blow Off Kit Mit Lancer Evo 7 8 9

Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

Koyo Koyorad Aluminium Radiator Nissan for Mitsubishi Lancer Evolution 4, 5 and 6.

3 layer and thickness is 48mm.

Must use with Evolution 7, 8 and 9 FAN.

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

Koyo Koyorad Aluminium Radiator Mit Lancer Evo 5 6

Buy online at SHOPEE / N1 Racing Team (credit card or installment plan available).

Koyo Racing Aluminium Radiator Honda suitable for Honda Civic FD2 Type R.

Designed for applications where engine configuration/size cause clearances issues for thicker core radiators. In this case, the 36mm V-Core Series will suit your needs. Intended for both circuit and daily use. Unless noted otherwise, all Koyorad V-Series All Aluminum Radiators are Nocolok brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the stock fan shrouds and fans.

100% Original from Japan. 

For more information:
Desmond – 0192149006 / 0122159006 (e-mail: n1r@n1racing.net)
Melissa – 0192253138 (e-mail: mel@racing.net)

About N1 Racing Team

Branch