Note: Keep out of reach of children Do not use on dry or old hard wood
How to use:
Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.
Step 3: Place sterlizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.
*Kalau dihantar melalui poslaju semenanjung Malaysia kena tambah RM7. Biasa ambil masa 1-2 hari bekerja untuk sampai destinasi. Jika barang tidak sampai, duit anda akan dipulangkan 100% gerenti.
Mudah Safety Tip
If it is a meet-up/COD, always inspect item condition on site before paying. Find out more safety tips in MudahSafety!