MG GM Ground Type European Custom Painted Model

This is a fully painted, completed build of the MG GM (Ground Type) – European Front Specification – crafted by me, the seller.

Details of the build process are as follows:

The color scheme is based on the "European Front" configuration, referencing the design illustrations found in the *Master Archive: GM* book.

・Construction
Standard preparation work was performed, including gate removal, addressing sink marks, and eliminating seam lines. The surface was sanded using 400, 600, and 800-grit sandpaper. After applying a primer (surfacer), minor adjustments were made to address any remaining sink marks, followed by a second coat of black surfacer.

・Painting
Finished with a matte (flat) coat.
Main white parts: Black surfacer, followed by a custom-mixed color (based on the instruction manual) applied with a gradient technique.
Main gray parts: Black surfacer, followed by a custom-mixed color (based on the instruction manual) applied with a gradient technique.
Weapons: Black surfacer, followed by Neutral Gray, with highlights added to create a gradient effect.
Beam rifle barrel shroud, etc.: Black surfacer, followed by Grand Prix White.
Thrusters, joints, etc.: "Mecha Surfacer Super Heavy."
Panel lining: Enamel Flat Black.

The camera/sensor areas are painted with fluorescent blue-green, which glows under UV light. Fine details were hand-painted.

The 1/100 scale pilot figure was primed and then finished with hand-painting.

After painting, both official and aftermarket water-slide decals were applied.

Weathering techniques—including washing, dry brushing, and chipping—were employed. "Weathering Master" sets and Creos "Weathering Pastels" were used to simulate dust and grime, particularly around the feet.

As this is a ground-combat mobile suit, the finish incorporates paint chipping and overall battle damage, inspired by the appearance of tanks. The chipping effects were created by physically scratching the paint surface using tools such as a design knife.